-
IC Package Converter (SOIC16-300mil/DIP16)
IC Package Converter (SOIC16-300mil/DIP16).
0.50 $In stock
-
IC Package Converter (QFP44-0.8mm/DIP44-300mil)
IC Package Converter (QFP44-0.8mm/DIP44-300mil).
1.00 $In stock
-
IC Package Converter (QFP44-0.8mm/DIP44-700mil)
IC Package Converter (QFP44-0.8mm/DIP44-700mil).
1.00 $In stock
-
IC Package Converter (QFP32-0.8mm/DIP32-300mil)
IC Package Converter (QFP32-0.8mm/DIP32-300mil).
0.75 $In stock
-
Raspberry Pi Pico Development Kit
This price includes only Pico kit without accessories. To add more accessories, please click below.
Raspberry Pi Pico development kit is a simple and powerful kit that contains many essential peripherals required to discover RPI Pico board capabilities and enable beginners to easily develop Pico-based projects.
40.00 $In stock
-
8-Channel DC Power Distributor
8-Channel DC power distributor module.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/Channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 143 X 72 X 20mm.
8.75 $In stock
-
4-Channel DC Power Distributor
4-Channel DC power distributor module.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/Channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 91 x 72 x 20mm.
5.00 $In stock
-
2-Channel DC Power Distributor
This module is a generic 2-channel DC power fuse distributor board.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 72 X 58 X 15mm.
3.00 $In stock
-
On Delay Timer Module (1-10 Sec)
Switch on delay timer module based on NE555 timer IC.
Features :
- Based on NE555 timer IC.
- Operating voltage: 5V, 12V Jumper set.
- Delay time range: 0-10 Sec Pot adjustable.
- Output: Relay dry contact (Normally open, Common, Normally close).
- Maximum output power: 2200W.
- Maximum output current: 10 ampere.
- Reverse polarity protection.
- Green LED for power indication.
- Red LED for output indication.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 74 x 26 x 17mm.
2.50 $In stock
-
3A Dual Channel Proportional Valve Driver (PD23)
PD23 is a dual-channel industrial proportional solenoid valve driver suitable for flow and pressure control.
Features :
- Operating mode: Switching.
- Operating voltage range: 18~36V.
- Maximum output power: 150W.
- Pot-adjustable output voltage range: 12~24V.
- Maximum output current: 3 ampere.
- Two selectable input signal ranges: (0~5V) and (0~10V).
- Two selectable output reference voltages 5V and 10V (MAX 20mA).
- Reverse polarity protection.
- Over-current and short-circuit protection.
- Green LED for power indication.
- Yellow LED for each output indication.
- Red LED for each output fault status.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 112 x 107 x 27 mm.
80.00 $In stock
-
3A Single Channel Proportional Valve Driver (PD13)
PD13 is a single-channel industrial proportional solenoid valve driver suitable for flow or pressure control.
Features :
- Operating mode: Switching.
- Operating voltage range: 18~36V.
- Maximum output power: 150W.
- Pot-adjustable output voltage range: 12~24V.
- Maximum output current: 3 ampere.
- Two selectable input signal ranges: (0~5V) and (0~10V).
- Two selectable output reference voltages 5V and 10V (MAX 20mA).
- Reverse polarity protection.
- Over-current and short-circuit protection.
- Green LED for power indication.
- Yellow LED for output indication.
- Red LED for output fault status.
- Four 3.5mm mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 107 x 80 x 27 mm.
47.50 $In stock
-
6A Single Channel Proportional Valve Driver (PD16)
PD16 is a single-channel industrial proportional solenoid valve driver suitable for flow or pressure control.
Features :
- Operating mode: Switching.
- Operating voltage range: 18~36V.
- Maximum output power: 150W.
- Pot-adjustable output voltage range: 12~24V.
- Maximum output current: 6 ampere.
- Two selectable input signal ranges: (0~5V) and (0~10V).
- Two selectable output reference voltages 5V and 10V (MAX 20mA).
- Reverse polarity protection.
- Over-current and short-circuit protection.
- Green LED for power indication.
- Yellow LED for output indication.
- Red LED for output fault status.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 122 X 82 X 30mm.
60.00 $In stock
-
6A Dual Channel Proportional Valve Driver (PD26)
PD26 is a dual-channel industrial proportional solenoid valve driver suitable for flow and pressure control.
Features :
- Operating mode: Switching.
- Operating voltage range: 18~36V.
- Maximum output power: 150W.
- Pot-adjustable output voltage range: 12~24V.
- Maximum output current: 6A.
- Two selectable input signal ranges: (0~5V) and (0~10V).
- Two selectable output reference voltages 5V and 10V (MAX 20mA).
- Reverse polarity protection.
- Over-current and short-circuit protection.
- Green LED for power indication.
- Yellow LED for each output indication.
- Red LED for each output fault status.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 122 X 112 X 30mm.
97.50 $In stock
-
8-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 8-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 27 X 14 X 4mm ( with no pin header ).
2.00 $In stock
-
6-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 6-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 21 X 14 X 4mm ( with no pin header ).
1.75 $In stock
-
4-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 4-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 16 X 14 X 4mm ( with no pin header ).
1.25 $In stock
-
2-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 2-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 14 X 11 X 4mm ( with no pin header ).
1.00 $In stock
-
4-Channel Isolation Module
4-channel opto-isolated module suitable for voltage level converting.
Features :
- Two selectable Input control signal ranges (3-12V and 9-24V).
- Output signal range: 3-24V.
- LED indicator for each input.
- Dedicated 2-pin screw clamp terminal for each input and output.
- Output can drive high or low-triggered load.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 80 X 50 X 17mm.
4.75 $In stock
4-Channel Isolation Module
4.75 $ -
8-Channel LED Terminal
8-channel LED terminal module
Features :
- Suitable for breadboard testing.
- LEDs are active high enabled. i.e to turn a LED on apply a high logic level.
- 1K Ohm current limiting resistor.
- TTL compatible.
- Wide input voltage range 3V:12V.
1.00 $In stock
8-Channel LED Terminal
1.00 $ -
4-Channel LED Terminal
4-channel LED terminal module.
Features :
- Suitable for breadboard testing.
- LEDs are active high enabled. i.e to turn a LED on apply a high logic level.
- 1K Ohm current limiting resistor.
- TTL compatible.
- Wide input voltage range 3V:12V.
0.50 $In stock
4-Channel LED Terminal
0.50 $ -
2-Channel LED Terminal
2-channel LED terminal module.
Features :
- Suitable for breadboard testing.
- LEDs are active high enabled. i.e to turn a LED on apply a high logic level.
- 1K Ohm current limiting resistor.
- TTL compatible.
- Wide input voltage range 3V:12V.
0.35 $In stock
2-Channel LED Terminal
0.35 $ -
1-Channel LED Terminal
1-channel LED terminal module.
Features :
- Suitable for breadboard testing.
- LED is active high enabled. i.e to turn a LED on apply a high logic level.
- 1K ohm current limiting resistor.
- TTL compatible.
- Wide input voltage range 3V:12V.
0.25 $In stock
1-Channel LED Terminal
0.25 $ -
AVR ISP Converter
AVR ISP converter. It converts standard 10-pin IDC male connector (2X5) to standard 6-pin header connector (2X3) which is suitable for Arduino ISP programming connector and to 6-pin header male connector for flexibility.
Features :
- Supported connectors: 2X5pin male IDC / 2X3pin female header / 1X6pin male header.
- All connectors are clearly silkscreen labeled to clarify the connection.
- Dimensions: 34 X 21 X 20mm.
1.50 $In stock
AVR ISP Converter
1.50 $ -
USBasp (Type A) AVR Programmer
Compact USB programmer for AVR microcontrollers with voltage selection, speed jumper, and clear status indication.
Features :
- Supported Devices: Compatible with most AVR 8-bit microcontrollers such as ATmega8, ATmega16, ATmega32, ATmega328, ATmega128, ATtiny series, and AT90 series.
- USB Type-A Connector: Direct connection to PC without extra cables.
- Supports low-clock speed programming via jumper setting.
- Target Power Selection: 3-pin header with jumper to supply the target device with 5V, 3.3V, or completely disconnect power.
-
Flexible Connectivity: Two options for connecting to the target device:
-
6-pin XH cable header.
-
10-pin IDC socket.
-
- 10-Pin IDC cable is included.
- Green LED: Indicates normal operation.
- Red LED: Indicates programming in progress (busy).
- Firmware Upgradable: Dedicated PRG header for easy firmware updates.
-
Wide Compatibility: Supports various AVR microcontrollers and works seamlessly with tools like AVRDUDE.
-
Compact PCB Design: Small form factor for convenient use in different projects.
- Dimensions(L X W X H): 75X20X12 mm (including connectors)
7.50 $In stock
-
Raspberry Pi Pico Breakout Board
Raspberry Pi Module Not Included.
Small handy board on which you can plug your Raspberry Pi Pico with screw terminals to get much easier to the GPIO pins.
Features :- All Raspberry Pi Pico pins are provided to 3.5mm pitch screw clamp terminals for easy access.
- Screw terminals are clearly silkscreen labeled (top and bottom) to clarify the connection.
- Four (Ø 3mm) mounting holes for easy installation.
- Dimensions: 90 X 60 X 12mm.
5.00 $In stock
- All Raspberry Pi Pico pins are provided to 3.5mm pitch screw clamp terminals for easy access.
-
Raspberry Pi Pico Work Area
Raspberry Pi Pico work area.
Features :
- Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
- On-board reverse polarity protection.
- All Raspberry Pi Pico ports are exposed to screw clamp terminals for external use.
- Large size work area 136 horizontal lines X 5 points, 34 X 3 vertical 5V lines, 34 X 3 vertical GND lines, 34 lines X 2 points (Raspberry Pi Pico pins in addition to power rails GND, 5V, VIN).
- Project Kit contains a Reset push button switch.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 175 X 99 X 20mm.
10.50 $In stock
Raspberry Pi Pico Work Area
10.50 $ -
Project Work Area
FR4 PCB General project work area with DC power input and regulation.
Features :
- Double layer FR4 PCB.
- Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
- On-board reverse polarity protection.
- 15 External input via screw clamp terminals 3.5mm pitch.
- Large size work area 148 horizontal lines X 5 points, 37 X 3 vertical 5V lines, 37 X 3 vertical GND lines, 15 lines X 2 points (in addition to power rails GND, 5V, VIN).
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 118 X 108 X 20mm.
9.50 $In stock
Project Work Area
9.50 $ -
10A AC Line Filter
AC 250V 10A EMI Filter.
Features :
- Maximum operating voltage: AC250V.
- Maximum Current: 10 Ampere.
- Cut-off frequency: 5KHz.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 60 X 30 X 30mm.
6.50 $In stock
10A AC Line Filter
6.50 $ -
Back to Back Vertical RJ45 8 Pin Panel Mountable
RJ45 8-pin vertical type back-to-back coupler panel mountable.
Features :
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 46 X 16 X 19mm.
1.75 $In stock
-
ATMEGA8/48/88/168/328 Project Kit
ATMEGA8 Project Kit supports 28-pin DIP AVR microcontrollers such as ATMEGA8, and ATMEGA328.
Features :
- Project Kit supports ATMEGA8, ATMEGA48, ATMEGA88, ATMEGA168, and ATMEGA328.
- Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
- On-board reverse polarity protection.
- All Microcontroller pins are exposed to screw clamp terminals for easy access.
- Large size work area 144 horizontal lines X 5 points, 36 X 3 vertical 5V lines, 36 X 3 vertical GND lines, 36 lines X 2 points (Blue pill pins in addition to power rails GND, 5V, VIN).
- Project Kit includes a green LED for power indication.
- 6-Pin ICSP header socket for connecting an external programmer (no need for removing chip).
- Project Kit provides a 16MHz crystal oscillator.
- Project Kit contains a Reset switch.
- Four 7mm M-F spacers are added to keep the board out of any wires and components erroneously located under the board.
- Dimensions: 162 X 77 X 20mm.
8.75 $In stock
-
DB9 Vertical Female to Screw Terminal + Pin Header
DB9 female socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for panel mounting and test applications.
Features :
- DB9 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB9 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 50 X 30 X 25mm.
2.50 $In stock
-
DB9 Vertical Male to Screw Terminal + Pin Header
DB9 male socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for panel mounting and test applications.
Features :
- DB9 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB9 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 50 X 30 X 25mm.
2.50 $Out of stock
-
DB25 Vertical Male to Screw Terminal + Pin Header
DB25 male socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector. DB25 is also suitable for panel mounting and test applications.
Features :
- DB25 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB25 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 4mm) mounting holes for easy installation.
- Dimensions: 65 X 45 X 25mm.
4.00 $In stock
-
4 Axes USB-Controlled CNC Breakout Board (Spark)
Spark CNC Controller is a completely buffered USB-controlled CNC breakout board. Supports 4 axes, four inputs, three output relays, analog output 0-10V, and can be powered from 220VAC .
117.50 $Out of stock
-
1-Channel Wireless Relay Module ESP-01 RM1W
1-Channel wireless relay module ( ESP-01 Wi-Fi ).
Features :
- Wireless: Wi-Fi (2X4 2.54mm female header for ESP-01S Module).
- Operating Voltage: DC5V.
- Output Rating: One relay output (Normally open and normally closed) 10A MAX (resistive load) Port pin IO0.
- Red LED for Relay status.
- Green LED for power indication.
- RST switch for reset operation.
- One (Ø 3.5mm) mounting hole for easy installation.
- Dimensions: 35 X 32 X 17mm.
3.25 $In stock
-
Mini PICkit 2 PIC Programmer
PICkit 2 programmer is a compact, low-cost tool for programming and debugging Microchip PIC microcontrollers. Features a USB-B connection, status LEDs, and broad device support, with optional accessories for added flexibility.
Features:
- Compact design for easy integration into any workspace.
- USB-B connector for stable and reliable PC connection.
- Right-angle 5-pin ICSP header: VPP, 5V, GND, PGD, PGC.
- Power and Busy LEDs for instant status feedback.
- Four mounting holes for secure installation.
- Includes 5-pin XH cable for quick and easy wiring.
- Supports a wide range of PIC microcontrollers.
- Free downloadable software – compatible with Windows up to version 11.
- Extension-ready – works perfectly with the PICKIT Programmer Extension Board (ZIF socket).
- Optional accessories – USB cable and Extension Board available (sold separately).
35.00 $Out of stock
Mini PICkit 2 PIC Programmer
35.00 $ -
PICkit2/PICkit3 Extension Board
PICkit 2 / PICkit 3 programmer extension board for DIP Microchip PIC microcontrollers.
3.25 $In stock
-
8-Channel Active High Relay Module (24V) RM824
8-Channel relay module (24V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
11.25 $In stock
-
4-Channel Active High Relay Module (24V) RM424
4-Channel relay module (24V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
6.75 $In stock
-
2-Channel Active High Relay Module(24V) RM224
2-Channel relay module (24V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
3.00 $In stock
-
8-Channel High/Low Trigger Relay Module (24V) Opto-isolated RM824I
8-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact ( isolated mode ).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 146 X 66 X 20mm.
11.00 $In stock
-
1-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM105I
1-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 30 X 20mm.
3.75 $In stock
-
4-Channel High/Low Trigger Relay Module (24V) Opto-isolated RM424I
4-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 80 X 68 X 20mm.
7.50 $In stock
-
Industrial 4-Channel Relay Module (12/24V) RM4D
Industrial grade 4-Channel relay module (12/24V) up to 10A rated current.
Features :
- Operating voltage: (12/24V).
- Maximum output current: 10A.
- LED indicator for each relay.
- 8-pin relay socket with clips for easy replacement.
- Two protective varistors (470V) for each relay contact (NO, NC).
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 96 X 72 X 35mm.
30.00 $In stock
-
2-Channel High/Low Trigger Relay Module(24V) Opto-isolated RM224I
2-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 47 X 20mm.
4.50 $In stock
-
1-Channel High/Low Trigger Relay Module (24V) Opto-isolated RM124I
1-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 30 X 20mm.
3.75 $In stock
-
1-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM112I
1-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 30 X 20mm.
3.75 $In stock
-
RJ45-8 to Screw Terminal + Pin Header (Horizontal Plugging)
RJ45 8pin socket on PCB to block terminals and pin header facilitates solderless connection to RJ45 connector and is also suitable for breadboard test applications.
Features :
- RJ45 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the RJ45 pin number to which they are routed.
- Pin header pitch distance is 2.54mm.
- Screw terminal pitch distance is 3.5mm.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 29 X 29 X 15mm.
1.75 $In stock
