-
DB9 Vertical Female to Screw Terminal + Pin Header
DB9 female socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for panel mounting and test applications.
Features :
- DB9 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB9 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 50 X 30 X 25mm.
50.00 EGPIn stock
-
DB9 Vertical Male to Screw Terminal + Pin Header
DB9 male socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for panel mounting and test applications.
Features :
- DB9 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB9 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 50 X 30 X 25mm.
50.00 EGPIn stock
-
4-Channel Opto-isolated AC Input Detector Module (ACD4)
This module detects whether AC input exists.
Features :
- Input voltage range 110-250V.
- Output voltage range 3-24V.
- Input is opto-isolated for safety.
- Four (Ø 3.5mm) mounting holes for easy installation.
- LED indicator for AC input.
- Output and power pins are broken out into a pin header for easy interfacing.
- Dimensions: 55 X 51 X 15mm.
50.00 EGPIn stock
-
1-Channel Relay Module (5V/12V/24V) RM1V
1-Channel relay module (5V/12V/24V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
50.00 EGPIn stock
1-Channel Relay Module (5V/12V/24V) RM1V
50.00 EGP -
Digital Humidity and Temperature Sensor Module (DHT11)
The DHT11 is a basic low-cost digital humidity and temperature sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and provides a digital signal on the data pin. It’s fairly simple to use but requires careful timing to grab data, you can only get new data from it once every 2 seconds.
This module is an implementation of the popular low-cost DHT11 sensor. It comes with proper headers to make it even easier to connect to any exposed pins of your development board.
Features :
- Operating voltage: 3V ~ 5V.
- Humidity measurement ranges from 20%~80% with ±5% accuracy.
- Temperature measurement range 0°C ~ 50°C with ±2°C accuracy.
- Interface: One-wire communication protocol.
50.00 EGPIn stock
-
PIC Project Kit PCB
PCB for PIC projects supports 40-pin DIP PIC microcontrollers.
50.00 EGPIn stock
PIC Project Kit PCB
50.00 EGP -
AVR Project Kit PCB
PCB for AVR Projects supports 40-pin DIP AVR microcontrollers ATMEGA8535, ATMEGA16, and ATMEGA32.
50.00 EGPIn stock
AVR Project Kit PCB
50.00 EGP -
ATMEGA128 Module PCB (F128)
Versatile and small size module based on ATMEGA128A microcontroller (PCB only).
50.00 EGPOut of stock
ATMEGA128 Module PCB (F128)
50.00 EGP -
On Delay Timer Module (1-10 Sec)
Switch on delay timer module based on NE555 timer IC.
Features :
- Based on NE555 timer IC.
- Operating voltage: 5V, 12V Jumper set.
- Delay time range: 0-10 Sec Pot adjustable.
- Output: Relay dry contact (Normally open, Common, Normally close).
- Maximum output power: 2200W.
- Maximum output current: 10 ampere.
- Reverse polarity protection.
- Green LED for power indication.
- Red LED for output indication.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 74 x 26 x 17mm.
45.00 EGPIn stock
On Delay Timer Module (1-10 Sec)
45.00 EGP -
Back to Back Vertical RJ45 8 Pin Panel Mountable
RJ45 8-pin vertical type back-to-back coupler panel mountable.
Features :
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 46 X 16 X 19mm.
45.00 EGPOut of stock
-
Photo Reflective Sensor Module (CNY70)
The photo-reflector consists of a GaAs infrared light-emitting diode and a silicon planar phototransistor. When an object is placed right in front of the sensor, the reflective infrared light emitted from the emitter will be picked up by the phototransistor and then output logical HIGH or logical LOW according to the distance between the reflection surface and the sensor.
Features :
- Using a wide voltage LM393 comparator.
- The working voltage of 3.3V-5V.
- Maximum output sink current 10mA.
- Operating range 0~5mm.
- Output is active low i.e an interruption produces a low output (LED is activated).
- Two (Ø 3.5mm) mounting holes for easy installation.
- It is compatible with Arduino board.
- Dimension: 38 X 17 X 17mm.
45.00 EGPIn stock
Photo Reflective Sensor Module (CNY70)
45.00 EGP -
AC/DC Filter 3A
AC/DC power filter is a bidirectional passive Low pass filter useful in filtering the output voltages of power supplies or transformers (not line input) such as filtering output 24VAC of a transformer. For AC Line filtration use our AC Line Filter.
Features :
- Maximum operating voltage: AC250V / DC400V.
- Maximum Current: 3A.
- Cut-off frequency: 5KHz.
- Operating temperature: -40 to 85°C.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 47 X 22 X 17mm.
45.00 EGPIn stock
AC/DC Filter 3A
45.00 EGP -
1-Channel Isolation Module
1-channel opto-isolated module suitable for voltage level converting.
Features :
- Two selectable Input control signal ranges (3-12V and 9-24V).
- Output signal range: 3-24V.
- LED indicator for each input.
- Dedicated 2-pin screw clamp terminal for each input and output.
- Output can drive high or low-triggered load.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 50 X 23 X 17mm.
40.00 EGPIn stock
1-Channel Isolation Module
40.00 EGP -
1-Channel Active High Relay Module (24V) RM124
1-Channel relay module (24V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
40.00 EGPIn stock
-
8-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 8-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 27 X 14 X 4mm ( with no pin header ).
40.00 EGPIn stock
-
RJ45-8 to Screw Terminal + Pin Header (Vertical Plugging)
RJ45 8pin socket vertical type on PCB to block terminals and pin header facilitates solderless connection to RJ45 connector and is also suitable for panel mounting and test applications.
Features :
- RJ45 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the RJ45 pin number to which they are routed.
- Pin header pitch distance is 2.54mm.
- Screw terminal pitch distance is 3.5mm.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 29 X 29 X 15mm.
40.00 EGPIn stock
-
DB9 Male to Screw Terminal + Pin Header
DB9 male socket on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for breadboard test applications.
Features :
- DB9 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB9 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 35 X 33 X 15mm.
40.00 EGPIn stock
DB9 Male to Screw Terminal + Pin Header
40.00 EGP -
DB9 Female to Screw Terminal + Pin Header
DB9 female socket on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for breadboard test applications.
Features :
- DB9 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB9 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 35 X 33 X 15mm.
40.00 EGPIn stock
-
Linear Power Module (LM317)
This module is an adjustable voltage regulator based on LM317.
Features :
- Input voltage range: 4.2 ~ 40V.
- Output voltage (adjustable): 1.2 ~ 37V.
- Maximum output current: 1A.
- Thermal shutdown protection.
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 43 X 21 X 23mm.
40.00 EGPIn stock
Linear Power Module (LM317)
40.00 EGP -
1-Channel Active High Relay Module (12V) RM112
1-Channel relay module (12V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
40.00 EGPIn stock
-
1-Channel Active High Relay Module (5V) RM105
1-Channel relay module (5V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
40.00 EGPIn stock
-
-
RJ45 Side by Side Coupler With Pin Header
RJ45 side by side coupler with pin header.
38.00 EGPIn stock
-
6-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 6-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 21 X 14 X 4mm ( with no pin header ).
35.00 EGPIn stock
-
AVR ISP Converter
AVR ISP converter. It converts standard 10-pin IDC male connector (2X5) to standard 6-pin header connector (2X3) which is suitable for Arduino ISP programming connector and to 6-pin header male connector for flexibility.
Features :
- Supported connectors: 2X5pin male IDC / 2X3pin female header / 1X6pin male header.
- All connectors are clearly silkscreen labeled to clarify the connection.
- Dimensions: 34 X 21 X 20mm.
35.00 EGPIn stock
AVR ISP Converter
35.00 EGP -
RJ45-8 to Screw Terminal + Pin Header (Horizontal Plugging)
RJ45 8pin socket on PCB to block terminals and pin header facilitates solderless connection to RJ45 connector and is also suitable for breadboard test applications.
Features :
- RJ45 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the RJ45 pin number to which they are routed.
- Pin header pitch distance is 2.54mm.
- Screw terminal pitch distance is 3.5mm.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 29 X 29 X 15mm.
35.00 EGPIn stock
-
Photo Interrupt Module (CNA1015)
A photo interrupter sensor consists of a light-emitting element (IR LED) and a light-receiving element (phototransistor) aligned facing each other. It works by detecting light interruption when a target object comes between both elements, acting as an optical switch. This changes the output of the sensor.
Features :
- USB a wide voltage comparator LM393.
- Operating voltage: 3.3 ~ 5V.
- Active low output i.e an interruption produces a low output (LED is activated).
- Maximum output sink current: 10mA.
- 5mm slot width.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 26 X 21 X 6mm.
35.00 EGPIn stock
Photo Interrupt Module (CNA1015)
35.00 EGP -
Photo Interrupt Module (CNA1015)
A photo interrupter sensor consists of a light-emitting element (IR LED) and a light-receiving element (phototransistor) aligned facing each other. It works by detecting light interruption when a target object comes between both elements, acting as an optical switch. This changes the output of the sensor.
Features :
- USB a wide voltage comparator LM393.
- Operating voltage: 3.3 ~ 5V.
- Active low output i.e an interruption produces a low output (LED is activated).
- Maximum output sink current: 10mA.
- 5mm slot width.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 26 X 21 X 18mm.
35.00 EGPIn stock
Photo Interrupt Module (CNA1015)
35.00 EGP -
RJ45 Side by Side Coupler
RJ45 side by side coupler.
35.00 EGPIn stock
RJ45 Side by Side Coupler
35.00 EGP -
RJ45 Back to Back Coupler
RJ45 back to back coupler.
35.00 EGPIn stock
RJ45 Back to Back Coupler
35.00 EGP -
1-Channel Opto-isolated AC Input Detector Module (ACD1)
This module detects whether AC input exists.
Features :
- Input voltage range 110-250V.
- Output voltage range 3-24V.
- Input is opto-isolated for safety.
- Four (Ø 3.5mm) mounting holes for easy installation.
- LED indicator for AC input.
- Output and power pins are broken out into a pin header for easy interfacing.
- Dimensions: 40 X 20 X 15mm.
30.00 EGPIn stock
-
RC Snubber Module
RC absorption/snubber circuit module. Suitable for relay contact protection.
30.00 EGPIn stock
RC Snubber Module
30.00 EGP -
IC Package Converter (QFP64-0.8mm/DIP64-1000mil)
IC Package Converter (QFP64-0.8mm/DIP64-1000mil).
25.00 EGPIn stock
-
4-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 4-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 16 X 14 X 4mm ( with no pin header ).
25.00 EGPIn stock
-
12V/1A DC-DC Buck Converter
12V/1A DC-DC buck converter (14-40Vin). Suitable to replace 7812 for high-efficiency requirements.
25.00 EGPIn stock
12V/1A DC-DC Buck Converter
25.00 EGP -
5V/1A DC-DC Buck Converter
5V/1A DC-DC buck converter (7-40Vin). Suitable to replace 7805 for high-efficiency requirements.
25.00 EGPIn stock
5V/1A DC-DC Buck Converter
25.00 EGP -
DC Power Module 9V,5V
9V battery socket with 5V regulator to pin header suitable for bread board applications.
25.00 EGPIn stock
DC Power Module 9V,5V
25.00 EGP -
DC Power Module
DC power socket adapter module suitable for breadboard with ON/OFF switch, fast blow fuse, LED indicator, and diode for reverse polarity protection.
25.00 EGPIn stock
DC Power Module
25.00 EGP -
IC Package Converter (QFP44-0.8mm/DIP44-300mil)
IC Package Converter (QFP44-0.8mm/DIP44-300mil).
20.00 EGPIn stock
-
IC Package Converter (QFP44-0.8mm/DIP44-700mil)
IC Package Converter (QFP44-0.8mm/DIP44-700mil).
20.00 EGPIn stock
-
2-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 2-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 14 X 11 X 4mm ( with no pin header ).
20.00 EGPIn stock
-
8-Channel LED Terminal
8-channel LED terminal module
Features :
- Suitable for breadboard testing.
- LEDs are active high enabled. i.e to turn a LED on apply a high logic level.
- 1K Ohm current limiting resistor.
- TTL compatible.
- Wide input voltage range 3V:12V.
20.00 EGPOut of stock
8-Channel LED Terminal
20.00 EGP -
RJ45 to Pin Header (Vertical Plugging)
RJ45 socket on PCB to header suitable for breadboard test applications.
20.00 EGPIn stock
RJ45 to Pin Header (Vertical Plugging)
20.00 EGP -
USB Type B Female to Pin Header (Vertical Type)
USB type B female socket on PCB to header suitable for panel mounting and test applications.
20.00 EGPIn stock
-
8-LED Active Low Module (LN8)
LN8 is an 8-bit LED display module.
Features :
- Suitable for breadboard testing.
- LEDs are active LOW enabled. i.e to turn a LED ON apply a low logic level.
- LN8 is a common anode module ( all positive terminals are connected together and brought out via pin header ).
- TTL compatible.
- Wide input voltage range 3V:12V.
- Compatible with our microcontroller development kits such as Eta32, and Betamini.
0.00 EGP – 20.00 EGPOut of stock
-
8-LED Active High Module (LP8)
LP8 is an 8-bit LED display module.
Features :
- Suitable for breadboard testing.
- LEDs are active high enabled. i.e to turn a LED on apply a high logic level.
- LP8 is a common cathode module ( all negative terminals are connected together and brought out via pin header ).
- TTL compatible.
- Wide input voltage range 3V:12V.
- Compatible with our microcontroller development kits such as Eta32, and Betamini.
20.00 EGPOut of stock
-
SPDT Relay to Pin Header
SPDT 5 pin 10A relay to header module suitable for breadboard test applications.
20.00 EGPIn stock
SPDT Relay to Pin Header
20.00 EGP -
DB25 Female to Pin Header
DB25 female socket on PCB to header suitable for breadboard test applications.
20.00 EGPIn stock
DB25 Female to Pin Header
20.00 EGP
