-
2-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 2-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 14 X 11 X 4mm ( with no pin header ).
20.00 EGPIn stock
-
3A / 8-Channel -ve Output Transistor Interface Module TN8
Opto-isolated 8-channel / 3 Ampere negative output transistor module for PLC industrial control.
Features :
- 8-channel negative output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3A.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 129 X 90 X 22mm.
550.00 EGPIn stock
-
USB to UART TTL Module (CH340) USB Socket Type B Micro to Header
Low-cost USB to serial UART/TTL converter module based on CH340 chip.
Features :
- USB type B micro female connector.
- Supports 3.3V/5V.
- Provides RX, TX, DTR, and RTS signals.
- Suitable for breadboard applications.
- Dimension: 30 X 20 X 12mm.
75.00 EGPIn stock
-
30A Current Sensor Module (ACS712)
30A Current Sensor Module (ACS712).
Features:
- Operating voltage: 5V.
- Green LED for power indication.
- Input interface 7.5mm screw clamp terminal.
- Power and output signal interface: 2.54mm male pin header.
- Maximum current: 30A.
- One (Ø 3.5mm) mounting hole for easy installation.
- Dimension: 34 X 15 X 14mm.
100.00 EGPIn stock
30A Current Sensor Module (ACS712)
100.00 EGP -
8-Channel DC Power Distributor
8-Channel DC power distributor module.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/Channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 143 X 72 X 20mm.
175.00 EGPIn stock
8-Channel DC Power Distributor
175.00 EGP -
6A Dual Channel Proportional Valve Driver (PD26)
PD26 is a dual-channel industrial proportional solenoid valve driver suitable for flow and pressure control.
Features :
- Operating mode: Switching.
- Operating voltage range: 18~36V.
- Maximum output power: 150W.
- Pot-adjustable output voltage range: 12~24V.
- Maximum output current: 6A.
- Two selectable input signal ranges: (0~5V) and (0~10V).
- Two selectable output reference voltages 5V and 10V (MAX 20mA).
- Reverse polarity protection.
- Over-current and short-circuit protection.
- Green LED for power indication.
- Yellow LED for each output indication.
- Red LED for each output fault status.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 122 X 112 X 30mm.
1,950.00 EGPIn stock
6A Dual Channel Proportional Valve Driver (PD26)
1,950.00 EGP -
1-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM105I
1-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 30 X 20mm.
75.00 EGPIn stock
-
Bluetooth Adaptor
Bluetooth adapter module is a hardware tool suitable for configuring Bluetooth modules via PC using a HyperTerminal or any other configuration software.
60.00 EGPIn stock
Bluetooth Adaptor
60.00 EGP -
RJ45 Side by Side Coupler
RJ45 side by side coupler.
25.00 EGPIn stock
RJ45 Side by Side Coupler
25.00 EGP -
2-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM205I
2-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four mounting holes for easy installation.
- Dimension: 66X30X20 mm.
90.00 EGPIn stock
-
Raspberry Pi Pico Development Kit
This price includes only Pico kit without accessories. To add more accessories, please click below.
Raspberry Pi Pico development kit is a simple and powerful kit that contains many essential peripherals required to discover RPI Pico board capabilities and enable beginners to easily develop Pico-based projects.
800.00 EGPIn stock
Raspberry Pi Pico Development Kit
800.00 EGP -
16-Channel Relay Module (12V) RM1612
16 Channel relay module (12V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
220.00 EGP260.00 EGPObsolete
16-Channel Relay Module (12V) RM1612
220.00 EGP260.00 EGP -
2-Channel Active High Relay Module (12V) RM212
2-Channel relay module (12V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
60.00 EGPIn stock
-
USB to UART TTL Module (CH340) Header to Header
Low-cost USB to serial UART/TTL converter module based on CH340 chip.
Features :
- USB (Header) to serial TTL (header).
- Supports 3.3V/5V.
- Provides RX, TX, DTR, and RTS signals.
- Suitable for breadboard applications.
- Dimension: 23 X 20 X 12mm.
70.00 EGPIn stock
-
DB25 Female to Pin Header
DB25 female socket on PCB to header suitable for breadboard test applications.
25.00 EGPIn stock
DB25 Female to Pin Header
25.00 EGP -
4 Port USB 2.0 Hub
This USB hub has four USB 2.0 ports each with a max total transmission speed of up to 480 MBps. All four ports are powered through the USB-B cable.
This hub is great for giving your laptop or computer a few more plug-in options, no adapter is required.Features:
- Number of ports: 4.
- no adapter is required.
- PC interface: USB type B.
- USB device interface: USB type A.
- Output: 100mA MAX.
- Two (Ø 3.5mm) mounting holes for easy installation.
80.00 EGPIn stock
4 Port USB 2.0 Hub
80.00 EGP -
IC Package Converter (SOIC4/DIP4)
IC Package Converter (SOIC4/DIP4).
5.00 EGPIn stock
IC Package Converter (SOIC4/DIP4)
5.00 EGP -
3A Single Channel Proportional Valve Driver (PD13)
PD13 is a single-channel industrial proportional solenoid valve driver suitable for flow or pressure control.
Features :
- Operating mode: Switching.
- Operating voltage range: 18~36V.
- Maximum output power: 150W.
- Pot-adjustable output voltage range: 12~24V.
- Maximum output current: 3 ampere.
- Two selectable input signal ranges: (0~5V) and (0~10V).
- Two selectable output reference voltages 5V and 10V (MAX 20mA).
- Reverse polarity protection.
- Over-current and short-circuit protection.
- Green LED for power indication.
- Yellow LED for output indication.
- Red LED for output fault status.
- Four 3.5mm mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 107 x 80 x 27 mm.
950.00 EGPIn stock
-
DB9 Vertical Male to Screw Terminal + Pin Header
DB9 male socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for panel mounting and test applications.
Features :
- DB9 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB9 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 50 X 30 X 25mm.
50.00 EGPOut of stock
-
2-Channel Solid State Relay Module (5V) SSR205
2-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.
Features :
- Input signal: 5V (active high).
- Maximum output current: 2A.
- Maximum output voltage: 240VAC.
- 2 Ampere overcurrent protection fuse.
- LED indicator.
150.00 EGPIn stock
-
8-Channel Active High Relay Module (5V) RM805
8-Channel relay module (5V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
225.00 EGPIn stock
-
IC Package Converter (SOIC20-150mil/DIP20)
IC Package Converter (SOIC20-150mil/DIP20).
10.00 EGPIn stock
-
IC Package Converter (SOIC20-300mil/DIP20)
IC Package Converter (SOIC20-300mil/DIP20).
10.00 EGPOut of stock
-
DB9 Vertical Female to Screw Terminal + Pin Header
DB9 female socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for panel mounting and test applications.
Features :
- DB9 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB9 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 50 X 30 X 25mm.
50.00 EGPIn stock
-
Industrial 4-Channel Relay Module (12/24V) RM4D
Industrial grade 4-Channel relay module (12/24V) up to 10A rated current.
Features :
- Operating voltage: (12/24V).
- Maximum output current: 10A.
- LED indicator for each relay.
- 8-pin relay socket with clips for easy replacement.
- Two protective varistors (470V) for each relay contact (NO, NC).
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 96 X 72 X 35mm.
600.00 EGPIn stock
-
1-Channel Solid State Relay Module (5V) SSR105
1-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.
Features :
- Input signal: 5V (active high).
- Maximum output current: 2A.
- Maximum output voltage: 240VAC.
- 2 Ampere overcurrent protection fuse.
- LED indicator.
75.00 EGPIn stock
-
3+3 Digits 0.56” 7-Segment Display Module 56D330
56D330 is a serial SPI 3+3-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. Max7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
90.00 EGPIn stock
-
3+3 Digits 0.36” 7-Segment Display Module 36D330
36D330 is a serial SPI 3+3-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
90.00 EGPIn stock
-
6-Channel DC Power Distributor
6-Channel DC power distributor module.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/Channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 119 X 73 X 19mm.
140.00 EGPIn stock
6-Channel DC Power Distributor
140.00 EGP -
IC Package Converter (QFP64-0.8mm/DIP64-1000mil)
IC Package Converter (QFP64-0.8mm/DIP64-1000mil).
25.00 EGPIn stock
-
IC Package Converter (SOIC16-300mil/DIP16)
IC Package Converter (SOIC16-300mil/DIP16).
10.00 EGPIn stock
-
4-Channel DC Power Distributor
4-Channel DC power distributor module.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/Channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 91 x 72 x 20mm.
100.00 EGPIn stock
4-Channel DC Power Distributor
100.00 EGP -
L298 DC Motor Driver Module
2-channel /2A or 1-channel /4A DC motor driver module, Operating Voltage: 5-35V.
75.00 EGPIn stock
L298 DC Motor Driver Module
75.00 EGP -
3A / 2-Channel -ve Output Transistor Interface Module TN2
Opto-isolated 2-channel / 3 Ampere negative output transistor module for PLC industrial control.
Features :
- 2-channel negative output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3A.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 90 X 53 X 22mm.
150.00 EGPIn stock
-
4-Channel Active High Relay Module (5V) RM405
4-Channel relay module (5V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
135.00 EGPIn stock
-
8-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM812I
8-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 140 X 66 X 20mm.
220.00 EGPIn stock
-
DB25 Male to Pin Header
DB25 male socket on PCB to header suitable for breadboard test applications.
25.00 EGPIn stock
DB25 Male to Pin Header
25.00 EGP -
4-Channel LED Terminal
4-channel LED terminal module.
Features :
- Suitable for breadboard testing.
- LEDs are active high enabled. i.e to turn a LED on apply a high logic level.
- 1K Ohm current limiting resistor.
- TTL compatible.
- Wide input voltage range 3V:12V.
10.00 EGPIn stock
4-Channel LED Terminal
10.00 EGP -
2-Channel Active High Relay Module (5V) RM205
2-Channel relay module (5V ) up to 10A rated current directly interfaced to microcontroller or TTL logic.
60.00 EGPIn stock
-
2-Channel Relay Module (5V/12V/24V) RM2V
2-Channel relay module (5V/12V/24V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
90.00 EGPIn stock
2-Channel Relay Module (5V/12V/24V) RM2V
90.00 EGP -
8-Channel Serial Relay Module
SRM8 is an 8-channel relay module designed to allow expanding microcontroller I/O pins. SRM8 is based on the 8-bit shift register 74595 IC. It supports 8 output relays while using only three I/Os. SRM8 can be daisy-chained to further extend the outputs to theoretically an infinite number while still using the same three microcontroller I/O pins. SRM8 module can be supplied from a wide range of voltages (5-40V). The input control signals are Digital Input (DI), Clock (CK), and Load (LD). Every time the shift register Clock input receives a low to high transition it accepts the data input value to bit0 and shifts the internal register data by one bit. Thus, 8 clock pulses are required to get one-byte data from the microcontroller. Finally, a latch pulse is required to load all internal shift register data to parallel outputs (Relays). This control sequence can be performed using a hardware-implemented SPI or a few lines of written code.
Features:
- Supports: 8-channel output relays.
- Protocol: SPI.
- Wide operating voltage range: 5-40V (two selectable ranges).
- Input signals (TTL): Data Input (DI), Clock (CK), and Load (LD).
- Output signals (TTL): Data Output (DO), Clock (CK), and Load (LD).
- Power-on relay status is OFF (a reset operation is auto-applied up on power on).
- Green LED for power indication.
- Red LED indicator for each output relay.
- Both normal open and normal close terminals are available.
- Reverse polarity protection for power input.
- Input and output signals are available via screw clamp terminals as well as pin headers for flexibility.
- SRM8 module can be daisy-chained to obtain a large number of relay outputs.
- The power connector is duplicated to facilitate the daisy chain board-to-board power connection of up to 16 modules, To connect more SRM8 modules use external wiring.
- Mounting: Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 207 X 45 X 18mm.
350.00 EGPIn stock
8-Channel Serial Relay Module
350.00 EGP -
IC Package Converter (SOIC14/DIP14)
IC Package Converter (SOIC14/DIP14).
10.00 EGPIn stock
IC Package Converter (SOIC14/DIP14)
10.00 EGP -
6-Channel Bi-directional Logic Level Converter
This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.
Features :
- 6-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
- Voltage signal range: 1.8-5V.
- 2.54mm male header.
- Dimensions: 21 X 14 X 4mm ( with no pin header ).
35.00 EGPIn stock
-
2-Channel Active High Relay Module(24V) RM224
2-Channel relay module (24V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
60.00 EGPIn stock
-
Photo Interrupt Module (CNA1015) – Vertical
A photo interrupter sensor consists of a light-emitting element (IR LED) and a light-receiving element (phototransistor) aligned facing each other. It works by detecting light interruption when a target object comes between both elements, acting as an optical switch. This changes the output of the sensor.
Features :
- USB a wide voltage comparator LM393.
- Operating voltage: 3.3 ~ 5V.
- Active low output i.e an interruption produces a low output (LED is activated).
- Maximum output sink current: 10mA.
- 5mm slot width.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 26 X 21 X 18mm.
35.00 EGPIn stock
-
4+4 Digits 0.36” 7-Segment Display Module 36D440
36D440 is a serial SPI 4+4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
100.00 EGPIn stock
-
4A Step Motor Driver SD40
SD40 is an easy-to-use professional stepper motor driver, which can control a two-phase stepping motor. It’s compatible with any CNC breakout board or any micro-based control board such as Arduino boards.
Features :
- Single input power (12–40VDC).
- 4 Amps/phase maximum output motor driving current.
- 4 Selectable work current (1A, 2A, 3A, 4A).
- Optional auto idle current reduction (30%).
- Step, direction, and enable input signals are TTL
compatible. - Steps/Revolution 400, 800, 1600, 3200.
- Test mode operation.
- All controlling input signals are opto-isolated for safety.
- High-speed opto-coupler isolator on step and direction.
- Over temperature and over current protection.
- Two input LED indicators, green for power and red for fault.
- Large area heat sink.
- Dimensions: 118 X 76 X 33mm.
400.00 EGPOut of stock
4A Step Motor Driver SD40
400.00 EGP -
7A/4-Channel Solid State Relay Module
Features:
- Number of supported channels: 4 independent channels.
- Input signal range: DC 3-30V.
- AC switching voltage: AC 24-250V.
- AC switching device: BTA16-600B.
- Maximum load current 7 amperes.
- A proper heatsink is used for overheating dissipation.
- All channels are opto-isolated.
- Each output has its own fuse for overcurrent protection.
- Each output has an AC snubber circuit (RC+varistor) for suppressing voltage spikes that arise from inductive loads.
- Input signals have reverse polarity protection.
- LED indicator for each input.
- Four (Ø 3.5 mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket (optional).
- Dimensions: 198 X 72 X 30 mm.
500.00 EGPIn stock
7A/4-Channel Solid State Relay Module
500.00 EGP
