-
8-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM805I
8-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 146 X 66 X 20mm.
220.00 EGPIn stock
-
2-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM205I
2-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four mounting holes for easy installation.
- Dimension: 66X30X20 mm.
90.00 EGPIn stock
-
4-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM405I
4-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four mounting holes for easy installation.
- Dimension: 80X66X20 mm.
150.00 EGPIn stock
-
4A Step Motor Driver SD40
SD40 is an easy-to-use professional stepper motor driver, which can control a two-phase stepping motor. It’s compatible with any CNC breakout board or any micro-based control board such as Arduino boards.
Features :
- Single input power (12–40VDC).
- 4 Amps/phase maximum output motor driving current.
- 4 Selectable work current (1A, 2A, 3A, 4A).
- Optional auto idle current reduction (30%).
- Step, direction, and enable input signals are TTL
compatible. - Steps/Revolution 400, 800, 1600, 3200.
- Test mode operation.
- All controlling input signals are opto-isolated for safety.
- High-speed opto-coupler isolator on step and direction.
- Over temperature and over current protection.
- Two input LED indicators, green for power and red for fault.
- Large area heat sink.
- Dimensions: 118 X 76 X 33mm.
400.00 EGPOut of stock
4A Step Motor Driver SD40
400.00 EGP -
USB to UART TTL Module (CH340) USB Socket Type B Micro to Header
Low-cost USB to serial UART/TTL converter module based on CH340 chip.
Features :
- USB type B micro female connector.
- Supports 3.3V/5V.
- Provides RX, TX, DTR, and RTS signals.
- Suitable for breadboard applications.
- Dimension: 30 X 20 X 12mm.
75.00 EGPIn stock
-
USB to UART TTL Module (CH340) USB Socket Type B to Header
Low-cost USB to serial UART/TTL converter module based on CH340 chip.
Features :
- USB type B female connector.
- Supports 3.3V/5V.
- Provides RX, TX, DTR, and RTS signals.
- Suitable for breadboard applications.
- Dimension: 40 X 20 X 16mm.
75.00 EGPIn stock
-
USB to UART TTL Module (CH340) Header to Header
Low-cost USB to serial UART/TTL converter module based on CH340 chip.
Features :
- USB (Header) to serial TTL (header).
- Supports 3.3V/5V.
- Provides RX, TX, DTR, and RTS signals.
- Suitable for breadboard applications.
- Dimension: 23 X 20 X 12mm.
70.00 EGPIn stock
-
Arduino Mega2560 Development Kit
Comprehensive development kit that provides interfacing many devices to Mega2560 board.
0.00 EGPObsolete
Arduino Mega2560 Development Kit
0.00 EGP -
12V/1A DC-DC Buck Converter
12V/1A DC-DC buck converter (14-40Vin). Suitable to replace 7812 for high-efficiency requirements.
30.00 EGPIn stock
12V/1A DC-DC Buck Converter
30.00 EGP -
5V/1A DC-DC Buck Converter
5V/1A DC-DC buck converter (7-40Vin). Suitable to replace 7805 for high-efficiency requirements.
30.00 EGPIn stock
5V/1A DC-DC Buck Converter
30.00 EGP -
DC Power Module 9V,5V
9V battery socket with 5V regulator to pin header suitable for bread board applications.
25.00 EGPIn stock
DC Power Module 9V,5V
25.00 EGP -
SPDT Relay to Pin Header (PCB)
SPDT 5 pin relay to header (PCB) suitable for breadboard test applications.
0.00 EGPObsolete
SPDT Relay to Pin Header (PCB)
0.00 EGP -
SPDT Relay to Pin Header
SPDT 5 pin 10A relay to header module suitable for breadboard test applications.
20.00 EGPIn stock
SPDT Relay to Pin Header
20.00 EGP -
DB9 Female to Pin Header
DB9 female socket on PCB to header suitable for breadboard test applications.
20.00 EGPIn stock
DB9 Female to Pin Header
20.00 EGP -
DB9 Male to Pin Header
DB9 male socket on PCB to header suitable for breadboard test applications.
20.00 EGPIn stock
DB9 Male to Pin Header
20.00 EGP -
L298 to Pin Header (PCB)
Dual H-Bridge L298 IC driver to pin header breakout board (PCB), Suitable for DC Motor Driving or interfacing to L297 to easily build stepper motor driver.
5.00 EGPIn stock
L298 to Pin Header (PCB)
5.00 EGP -
DC Motor Driver Module L298
Up to 4 ampere DC motor driver based on L298 H bridge.
0.00 EGPObsolete
DC Motor Driver Module L298
0.00 EGP -
2 Ampere Step Motor Driver FIPSD2M
2 Ampere stepper driver with current adjust and full/half step setting based on L297 and L298. It is Compatible with any microcontroller-based control system.
0.00 EGPObsolete
2 Ampere Step Motor Driver FIPSD2M
0.00 EGP -
PICkit 2 PIC Programmer
PICkit 2 programmer is a low-cost programming tool for Microchip PIC microcontrollers.
750.00 EGPOut of stock
PICkit 2 PIC Programmer
750.00 EGP -
AVR ICSP Adaptor
AVR ICSP Adaptor board for programming AVR DIP package microcontrollers such as ATMEGA8,16,32,328,…
0.00 EGPObsolete
AVR ICSP Adaptor
0.00 EGP -
USBasp AVR Programmer with Adapter
USBasp is an in-circuit programmer for Atmel AVR controllers with acrylic base and spacers and additional ZIF socket adaptor board.
0.00 EGPObsolete
USBasp AVR Programmer with Adapter
0.00 EGP -
USBasp AVR Programmer With Acrylic Base
USBasp is an in-circuit programmer for Atmel AVR controllers with acrylic base and spacers.
0.00 EGPObsolete
-
USBasp (Type B) AVR Programmer
USBasp is an in-circuit programmer for Atmel AVR microcontrollers.
Features :
- USB B female-type socket.
- 6-pin Flat cable is included.
- Green LED for normal status.
- Red LED for busy status.
- Support low-clock speed programming (Jumper setting).
- Target device can be USB-biased (Jumper setting).
- Easy firmware updating (Jumper setting).
- Support both 6-pin header and 10-pin IDC socket for flexibility.
This price includes only a USBasp programmer without USB cable. To add a USB cable please click below.
160.00 EGPIn stock
USBasp (Type B) AVR Programmer
160.00 EGP -
USB-Controlled Relay Module URK77
Simple cheap USB-controlled data acquisition card. It supports seven output relays and seven inputs ( limit switch or proximity ).
0.00 EGPObsolete
USB-Controlled Relay Module URK77
0.00 EGP -
USB-Controlled Relay Module URK44
Simple cheap USB-controlled data acquisition card. It supports four output relays and four inputs ( limit switch or proximity ).
0.00 EGPObsolete
USB-Controlled Relay Module URK44
0.00 EGP -
USB-Controlled Relay Module URK22
Simple cheap USB-controlled data acquisition card. It supports two output relays and two inputs ( limit switch or proximity ).
0.00 EGPObsolete
USB-Controlled Relay Module URK22
0.00 EGP -
CNC Breakout Board (BOB3M)
Complete buffered opto-isolated parallel breakout board Up to 6 axes, five inputs , Spindle and Fan output relays , analog output (0-5V / 0-10V) , watchdog protection and powered from 220VAC.
0.00 EGPObsolete
CNC Breakout Board (BOB3M)
0.00 EGP -
CNC Breakout Board (BOB4)
Complete buffered non-isolated parallel breakout board 4 axes , five inputs ,Spindle and fan output relays and 12-48 volt power input.
0.00 EGPObsolete
CNC Breakout Board (BOB4)
0.00 EGP -
CNC Breakout Board (BOB3)
Complete buffered isolated parallel breakout board with analog output (0-5V / 0-10V) and watchdog protection.
0.00 EGPObsolete
CNC Breakout Board (BOB3)
0.00 EGP -
8-Channel Active High Relay Module (12V) RM812
8-Channel relay module (12V ) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
225.00 EGPIn stock
-
4-Channel Active High Relay Module (12V) RM412
4-Channel relay module (12V ) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
135.00 EGPIn stock
-
4-Channel Relay Module (5V/12V/24V) RM4V
4-Channel relay module (5V/12V/24V) up to 10A rated current directly interfaced to microcontroller or TTL logic .
150.00 EGPIn stock
4-Channel Relay Module (5V/12V/24V) RM4V
150.00 EGP -
8-Channel Relay Module (5V/12V/24V) RM8V
8-Channel relay module (5V/12V/24V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
250.00 EGPOut of stock
8-Channel Relay Module (5V/12V/24V) RM8V
250.00 EGP -
Breadboard Power Supply Module MB102
Power supply module for breadboard applications (3.3V, 5V, and VDC).
Features :
- Input voltage range 6.5V >> 15V.
- Output voltages 3.3V, 5V, and Vin.
- Output 5V (USB type A female socket).
- Output voltages are available via screw terminal block and pin header for flexibility.
- ON/OFF switch.
- Reverse polarity protection.
- Over current protection (1A).
90.00 EGPIn stock
Breadboard Power Supply Module MB102
90.00 EGP -
DC Power Module
DC power socket adapter module suitable for breadboard with ON/OFF switch, fast blow fuse, LED indicator, and diode for reverse polarity protection.
25.00 EGPIn stock
DC Power Module
25.00 EGP -
L298 to Pin Header
Dual H-Bridge L298 IC driver to pin header breakout board, Suitable for DC Motor Driving or interfacing to L297 to easily build stepper motor driver.
60.00 EGPIn stock
L298 to Pin Header
60.00 EGP -
RJ45 to Pin Header (Horizontal Plugging)
RJ45 socket on PCB to header suitable for breadboard test applications.
15.00 EGPIn stock
RJ45 to Pin Header (Horizontal Plugging)
15.00 EGP -
Arduino Uno Project Kit
Versatile kit for easy soldering components on a test board and building fast projects based on Arduino Uno.
130.00 EGPIn stock
Arduino Uno Project Kit
130.00 EGP -
PIC Project Kit PCB
PCB for PIC projects supports 40-pin DIP PIC microcontrollers.
50.00 EGPIn stock
PIC Project Kit PCB
50.00 EGP -
PIC Project Kit
PIC Project kit supports 40-pin DIP PIC microcontrollers such as PIC6F877A, 18F452, and more.
Features :
- Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
- On-board reverse polarity protection.
- All microcontroller ports are exposed to screw clamp terminals for external use.
- Large size work area 136 horizontal lines X 5 points, 34 X 3 vertical 5V lines, 34 X 3 vertical GND lines, 34 lines X 2 points (Raspberry Pi Pico pins in addition to power rails GND, 5V, VIN).
- Project Kit contains a Reset push button switch.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 181 X 105 X 21mm.
220.00 EGPIn stock
PIC Project Kit
220.00 EGP -
PIC Development Kit (FEPSP5)
PIC development kit supports many 40 pin DIP microcontrollers and provides the most common interface circuits, suitable for beginners and recent graduated engineers.
0.00 EGPObsolete
PIC Development Kit (FEPSP5)
0.00 EGP -
AVR Project Kit PCB
PCB for AVR Projects supports 40-pin DIP AVR microcontrollers ATMEGA8535, ATMEGA16, and ATMEGA32.
50.00 EGPIn stock
AVR Project Kit PCB
50.00 EGP -
AVR Project Kit
AVR Project Kit supports 40-pin DIP AVR microcontrollers ATMEGA8535, ATMEGA16, and ATMEGA32.
Features :
- Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
- On-board reverse polarity protection.
- All microcontroller ports are exposed to screw clamp terminals for external use.
- Large size work area 136 horizontal lines X 5 points, 34 X 3 vertical 5V lines, 34 X 3 vertical GND lines, 34 lines X 2 points (Raspberry Pi Pico pins in addition to power rails GND, 5V, VIN).
- Project Kit contains a Reset push button switch.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 181 X 105 X 21mm.
220.00 EGPIn stock
AVR Project Kit
220.00 EGP -
ATMEGA128 Module PCB (F128)
Versatile and small size module based on ATMEGA128A microcontroller (PCB only).
50.00 EGPOut of stock
ATMEGA128 Module PCB (F128)
50.00 EGP -
ATMEGA128 Module With Arduino Bootloader (F128B)
Pluggable small-size and versatile module based on ATMEGA128A microcontroller with Arduino bootloader. Suitable for breadboard applications.
Features :
- Microcontroller: ATMEGA128 Arduino bootloader preprogrammed.
- All I/O ports are provided through a 2.54mm pitch pin header.
- Power and other special function pins are provided (5X GND, 2X VCC, AVCC, REF, PEN, and Reset).
- AVCC is generated using an LC filter for powering analog circuits.
- Oscillator frequency: 16MHz.
- USB/Serial TTL converter (CH340) (serial communication and programming) type B micro connector.
- SMD green LED for power indication.
- Two SMD red LED indicators for TX and RX.
- Reset switch.
- Standard 10-pin IDC connector for programming as well as a simplified 6-pin header.
- Dimensions: 84 X 35 X 18mm.
375.00 EGPIn stock
-
ATMEGA128 Module (F128)
Pluggable small-size and versatile module based on ATMEGA128A microcontroller. Suitable for breadboard applications.
Features :
- Microcontroller: ATMEGA128.
- All I/O ports are provided through 2.54mm pitch pin header.
- Power and other special function pins are provided (5X GND, 2X VCC, AVCC, REF, PEN, and Reset).
- AVCC is generated using an LC filter for powering analog circuits.
- Oscillator frequency: 16MHz.
- SMD green LED for power indication.
- Reset switch.
- Standard 10-pin IDC connector for programming as well as a simplified 6-pin header.
- Dimensions: 84 X 35 X 18mm.
350.00 EGPIn stock
ATMEGA128 Module (F128)
350.00 EGP -
AVR Development Kit (Eta32Mini)
Eta32mini is a low-cost ATMEL AVR development kit based on ATMEGA32 microcontroller and provides the basic interface circuits to a microcontroller, suitable for undergraduate laboratories and beginners.
This price includes only Eta32mini kit without accessories. To add more accessories please click below.
900.00 EGPIn stock
AVR Development Kit (Eta32Mini)
900.00 EGP -
AVR Development Kit (FEPSV4)
ATMEL AVR development kit supports 40 pin DIP AVR microcontrollers and have many useful modules suitable for beginners and recent graduated engineers.
0.00 EGPObsolete
AVR Development Kit (FEPSV4)
0.00 EGP
