-
USB to UART TTL Module (CH340) USB Socket Type B Micro to Header
Low-cost USB to serial UART/TTL converter module based on CH340 chip.
Features :
- USB type B micro female connector.
- Supports 3.3V/5V.
- Provides RX, TX, DTR, and RTS signals.
- Suitable for breadboard applications.
- Dimension: 30 X 20 X 12mm.
3.75 $In stock
-
USB to UART TTL Module (CH340) USB Socket Type B to Header
Low-cost USB to serial UART/TTL converter module based on CH340 chip.
Features :
- USB type B female connector.
- Supports 3.3V/5V.
- Provides RX, TX, DTR, and RTS signals.
- Suitable for breadboard applications.
- Dimension: 40 X 20 X 16mm.
3.75 $In stock
-
USB to UART TTL Module (CH340) Header to Header
Low-cost USB to serial UART/TTL converter module based on CH340 chip.
Features :
- USB (Header) to serial TTL (header).
- Supports 3.3V/5V.
- Provides RX, TX, DTR, and RTS signals.
- Suitable for breadboard applications.
- Dimension: 23 X 20 X 12mm.
3.50 $In stock
-
Arduino Mega2560 Development Kit
Comprehensive development kit that provides interfacing many devices to Mega2560 board.
0.00 $Obsolete
-
12V/1A DC-DC Buck Converter
12V/1A DC-DC buck converter (14-40Vin). Suitable to replace 7812 for high-efficiency requirements.
1.50 $In stock
12V/1A DC-DC Buck Converter
1.50 $ -
5V/1A DC-DC Buck Converter
5V/1A DC-DC buck converter (7-40Vin). Suitable to replace 7805 for high-efficiency requirements.
1.50 $In stock
5V/1A DC-DC Buck Converter
1.50 $ -
DC Power Module 9V,5V
9V battery socket with 5V regulator to pin header suitable for bread board applications.
1.25 $In stock
DC Power Module 9V,5V
1.25 $ -
SPDT Relay to Pin Header (PCB)
SPDT 5 pin relay to header (PCB) suitable for breadboard test applications.
0.00 $Obsolete
-
SPDT Relay to Pin Header
SPDT 5 pin 10A relay to header module suitable for breadboard test applications.
1.00 $In stock
SPDT Relay to Pin Header
1.00 $ -
DB9 Female to Pin Header
DB9 female socket on PCB to header suitable for breadboard test applications.
1.00 $In stock
DB9 Female to Pin Header
1.00 $ -
DB9 Male to Pin Header
DB9 male socket on PCB to header suitable for breadboard test applications.
1.00 $In stock
DB9 Male to Pin Header
1.00 $ -
L298 to Pin Header (PCB)
Dual H-Bridge L298 IC driver to pin header breakout board (PCB), Suitable for DC Motor Driving or interfacing to L297 to easily build stepper motor driver.
0.25 $In stock
L298 to Pin Header (PCB)
0.25 $ -
DC Motor Driver Module L298
Up to 4 ampere DC motor driver based on L298 H bridge.
0.00 $Obsolete
DC Motor Driver Module L298
0.00 $ -
2 Ampere Step Motor Driver FIPSD2M
2 Ampere stepper driver with current adjust and full/half step setting based on L297 and L298. It is Compatible with any microcontroller-based control system.
0.00 $Obsolete
-
PICkit 2 PIC Programmer
PICkit 2 programmer is a low-cost programming tool for Microchip PIC microcontrollers.
37.50 $Out of stock
PICkit 2 PIC Programmer
37.50 $ -
AVR ICSP Adaptor
AVR ICSP Adaptor board for programming AVR DIP package microcontrollers such as ATMEGA8,16,32,328,…
0.00 $Obsolete
AVR ICSP Adaptor
0.00 $ -
USBasp AVR Programmer with Adapter
USBasp is an in-circuit programmer for Atmel AVR controllers with acrylic base and spacers and additional ZIF socket adaptor board.
0.00 $Obsolete
-
USBasp AVR Programmer With Acrylic Base
USBasp is an in-circuit programmer for Atmel AVR controllers with acrylic base and spacers.
0.00 $Obsolete
-
USBasp (Type B) AVR Programmer
USBasp is an in-circuit programmer for Atmel AVR microcontrollers.
Features :
- USB B female-type socket.
- 6-pin Flat cable is included.
- Green LED for normal status.
- Red LED for busy status.
- Support low-clock speed programming (Jumper setting).
- Target device can be USB-biased (Jumper setting).
- Easy firmware updating (Jumper setting).
- Support both 6-pin header and 10-pin IDC socket for flexibility.
This price includes only a USBasp programmer without USB cable. To add a USB cable please click below.
8.00 $In stock
-
USB-Controlled Relay Module URK77
Simple cheap USB-controlled data acquisition card. It supports seven output relays and seven inputs ( limit switch or proximity ).
0.00 $Obsolete
-
USB-Controlled Relay Module URK44
Simple cheap USB-controlled data acquisition card. It supports four output relays and four inputs ( limit switch or proximity ).
0.00 $Obsolete
-
USB-Controlled Relay Module URK22
Simple cheap USB-controlled data acquisition card. It supports two output relays and two inputs ( limit switch or proximity ).
0.00 $Obsolete
-
CNC Breakout Board (BOB3M)
Complete buffered opto-isolated parallel breakout board Up to 6 axes, five inputs , Spindle and Fan output relays , analog output (0-5V / 0-10V) , watchdog protection and powered from 220VAC.
0.00 $Obsolete
CNC Breakout Board (BOB3M)
0.00 $ -
CNC Breakout Board (BOB4)
Complete buffered non-isolated parallel breakout board 4 axes , five inputs ,Spindle and fan output relays and 12-48 volt power input.
0.00 $Obsolete
CNC Breakout Board (BOB4)
0.00 $ -
CNC Breakout Board (BOB3)
Complete buffered isolated parallel breakout board with analog output (0-5V / 0-10V) and watchdog protection.
0.00 $Obsolete
CNC Breakout Board (BOB3)
0.00 $ -
8-Channel Active High Relay Module (12V) RM812
8-Channel relay module (12V ) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
11.25 $In stock
-
4-Channel Active High Relay Module (12V) RM412
4-Channel relay module (12V ) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
6.75 $In stock
-
4-Channel Relay Module (5V/12V/24V) RM4V
4-Channel relay module (5V/12V/24V) up to 10A rated current directly interfaced to microcontroller or TTL logic .
7.50 $In stock
-
8-Channel Relay Module (5V/12V/24V) RM8V
8-Channel relay module (5V/12V/24V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
12.50 $Out of stock
-
Breadboard Power Supply Module MB102
Power supply module for breadboard applications (3.3V, 5V, and VDC).
Features :
- Input voltage range 6.5V >> 15V.
- Output voltages 3.3V, 5V, and Vin.
- Output 5V (USB type A female socket).
- Output voltages are available via screw terminal block and pin header for flexibility.
- ON/OFF switch.
- Reverse polarity protection.
- Over current protection (1A).
4.50 $In stock
-
DC Power Module
DC power socket adapter module suitable for breadboard with ON/OFF switch, fast blow fuse, LED indicator, and diode for reverse polarity protection.
1.25 $In stock
DC Power Module
1.25 $ -
L298 to Pin Header
Dual H-Bridge L298 IC driver to pin header breakout board, Suitable for DC Motor Driving or interfacing to L297 to easily build stepper motor driver.
3.00 $In stock
L298 to Pin Header
3.00 $ -
RJ45 to Pin Header (Horizontal Plugging)
RJ45 socket on PCB to header suitable for breadboard test applications.
0.75 $In stock
-
Arduino Uno Project Kit
Versatile kit for easy soldering components on a test board and building fast projects based on Arduino Uno.
6.50 $In stock
Arduino Uno Project Kit
6.50 $ -
PIC Project Kit PCB
PCB for PIC projects supports 40-pin DIP PIC microcontrollers.
2.50 $In stock
PIC Project Kit PCB
2.50 $ -
PIC Project Kit
PIC Project kit supports 40-pin DIP PIC microcontrollers such as PIC6F877A, 18F452, and more.
Features :
- Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
- On-board reverse polarity protection.
- All microcontroller ports are exposed to screw clamp terminals for external use.
- Large size work area 136 horizontal lines X 5 points, 34 X 3 vertical 5V lines, 34 X 3 vertical GND lines, 34 lines X 2 points (Raspberry Pi Pico pins in addition to power rails GND, 5V, VIN).
- Project Kit contains a Reset push button switch.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 181 X 105 X 21mm.
11.00 $In stock
PIC Project Kit
11.00 $ -
PIC Development Kit (FEPSP5)
PIC development kit supports many 40 pin DIP microcontrollers and provides the most common interface circuits, suitable for beginners and recent graduated engineers.
0.00 $Obsolete
PIC Development Kit (FEPSP5)
0.00 $ -
AVR Project Kit PCB
PCB for AVR Projects supports 40-pin DIP AVR microcontrollers ATMEGA8535, ATMEGA16, and ATMEGA32.
2.50 $In stock
AVR Project Kit PCB
2.50 $ -
AVR Project Kit
AVR Project Kit supports 40-pin DIP AVR microcontrollers ATMEGA8535, ATMEGA16, and ATMEGA32.
Features :
- Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
- On-board reverse polarity protection.
- All microcontroller ports are exposed to screw clamp terminals for external use.
- Large size work area 136 horizontal lines X 5 points, 34 X 3 vertical 5V lines, 34 X 3 vertical GND lines, 34 lines X 2 points (Raspberry Pi Pico pins in addition to power rails GND, 5V, VIN).
- Project Kit contains a Reset push button switch.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 181 X 105 X 21mm.
11.00 $In stock
AVR Project Kit
11.00 $ -
ATMEGA128 Module PCB (F128)
Versatile and small size module based on ATMEGA128A microcontroller (PCB only).
2.50 $Out of stock
ATMEGA128 Module PCB (F128)
2.50 $ -
ATMEGA128 Module With Arduino Bootloader (F128B)
Pluggable small-size and versatile module based on ATMEGA128A microcontroller with Arduino bootloader. Suitable for breadboard applications.
Features :
- Microcontroller: ATMEGA128 Arduino bootloader preprogrammed.
- All I/O ports are provided through a 2.54mm pitch pin header.
- Power and other special function pins are provided (5X GND, 2X VCC, AVCC, REF, PEN, and Reset).
- AVCC is generated using an LC filter for powering analog circuits.
- Oscillator frequency: 16MHz.
- USB/Serial TTL converter (CH340) (serial communication and programming) type B micro connector.
- SMD green LED for power indication.
- Two SMD red LED indicators for TX and RX.
- Reset switch.
- Standard 10-pin IDC connector for programming as well as a simplified 6-pin header.
- Dimensions: 84 X 35 X 18mm.
18.75 $In stock
-
ATMEGA128 Module (F128)
Pluggable small-size and versatile module based on ATMEGA128A microcontroller. Suitable for breadboard applications.
Features :
- Microcontroller: ATMEGA128.
- All I/O ports are provided through 2.54mm pitch pin header.
- Power and other special function pins are provided (5X GND, 2X VCC, AVCC, REF, PEN, and Reset).
- AVCC is generated using an LC filter for powering analog circuits.
- Oscillator frequency: 16MHz.
- SMD green LED for power indication.
- Reset switch.
- Standard 10-pin IDC connector for programming as well as a simplified 6-pin header.
- Dimensions: 84 X 35 X 18mm.
17.50 $In stock
ATMEGA128 Module (F128)
17.50 $ -
AVR Development Kit (Eta32Mini)
Eta32mini is a low-cost ATMEL AVR development kit based on ATMEGA32 microcontroller and provides the basic interface circuits to a microcontroller, suitable for undergraduate laboratories and beginners.
This price includes only Eta32mini kit without accessories. To add more accessories please click below.
45.00 $In stock
AVR Development Kit (Eta32Mini)
45.00 $ -
AVR Development Kit (FEPSV4)
ATMEL AVR development kit supports 40 pin DIP AVR microcontrollers and have many useful modules suitable for beginners and recent graduated engineers.
0.00 $Obsolete
AVR Development Kit (FEPSV4)
0.00 $ -
DB25 Female to Pin Header
DB25 female socket on PCB to header suitable for breadboard test applications.
1.25 $In stock
DB25 Female to Pin Header
1.25 $ -
DB25 to Header (PCB)
DB25 male/female socket on PCB to header suitable for breadboard test applications PCB Only.
0.25 $In stock
DB25 to Header (PCB)
0.25 $ -
DB25 Male to Pin Header
DB25 male socket on PCB to header suitable for breadboard test applications.
1.25 $In stock
DB25 Male to Pin Header
1.25 $ -
CNC Breakout Board (PPIC1)
Complete buffered CNC parallel breakout board. Up to 6 axes, five inputs , Spindle and Fan output relays , analog output 0-10V, watchdog protection with extra output Relay , and powered from 220VAC.
0.00 $Obsolete
CNC Breakout Board (PPIC1)
0.00 $
