-
Industrial 8-Channel Relay Module (12/24V) RM8D
Industrial grade 8-Channel relay module (12/24V) up to 10A rated current.
Features :
- Operating voltage: (12/24V).
- Maximum output current: 10A.
- LED indicator for each relay.
- 8-pin relay socket with clips for easy replacement.
- Two protective varistors (470V) for each relay contact (NO, NC).
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 170 X 72 X 35mm.
1,000.00 EGPIn stock
Industrial 8-Channel Relay Module (12/24V) RM8D
1,000.00 EGP -
8-Channel Opto-isolated AC Input Detector Module (ACD8)
This module detects whether AC input exists.
Features :
- Input voltage range 110-250V.
- Output voltage range 3-24V.
- Input is opto-isolated for safety.
- Four (Ø 3.5mm) mounting holes for easy installation.
- LED indicator for AC input.
- Output and power pins are broken out into a pin header for easy interfacing.
- Dimensions: 96 X 51 X 15mm.
100.00 EGPIn stock
-
4-Channel Opto-isolated AC Input Detector Module (ACD4)
This module detects whether AC input exists.
Features :
- Input voltage range 110-250V.
- Output voltage range 3-24V.
- Input is opto-isolated for safety.
- Four (Ø 3.5mm) mounting holes for easy installation.
- LED indicator for AC input.
- Output and power pins are broken out into a pin header for easy interfacing.
- Dimensions: 55 X 51 X 15mm.
50.00 EGPIn stock
-
1-Channel Opto-isolated AC Input Detector Module (ACD1)
This module detects whether AC input exists.
Features :
- Input voltage range 110-250V.
- Output voltage range 3-24V.
- Input is opto-isolated for safety.
- Four (Ø 3.5mm) mounting holes for easy installation.
- LED indicator for AC input.
- Output and power pins are broken out into a pin header for easy interfacing.
- Dimensions: 40 X 20 X 15mm.
30.00 EGPOut of stock
-
ESP32 Breakout Board
ESP8266 (ESP32) Wi-Fi module breakout board.
15.00 EGPIn stock
ESP32 Breakout Board
15.00 EGP -
USB to UART TTL Module (CH340) USB Socket Type A Male to Header
Low-cost USB to serial UART/TTL converter module based on CH340 chip.
Features :
- USB type A male connector.
- Supports 3.3V/5V.
- Provides RX, TX, DTR, and RTS signals.
- Suitable for breadboard applications.
- Dimension: 52 X 18 X 12mm.
60.00 EGPIn stock
-
USB Type B Micro to Pin Header
USB type B micro socket on PCB to header suitable for breadboard test applications.
12.00 EGPIn stock
USB Type B Micro to Pin Header
12.00 EGP -
Photo Interrupt Module (CNA1015) – Vertical
A photo interrupter sensor consists of a light-emitting element (IR LED) and a light-receiving element (phototransistor) aligned facing each other. It works by detecting light interruption when a target object comes between both elements, acting as an optical switch. This changes the output of the sensor.
Features :
- USB a wide voltage comparator LM393.
- Operating voltage: 3.3 ~ 5V.
- Active low output i.e an interruption produces a low output (LED is activated).
- Maximum output sink current: 10mA.
- 5mm slot width.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 26 X 21 X 18mm.
35.00 EGPIn stock
-
Load Cell Module (HX711)
This module provides an easy way to interface microcontroller to any load cell. It is based on HX711 IC which provides a high-resolution analog-to-digital converter and uses a two-wire interface (clock and data) for communication. A very accurate weight measurement can be obtained with some calibration.
Features :
- Operating Voltage 2.7V- 5.5V.
- Operating Current: 1.5mA.
- Resolution 24 bit.
- Output data rate 10SPS or 80SPS.
- Operation temperature range: -40 ~ +85℃.
- Dimension : 38 X 30 X 3mm.
60.00 EGPOut of stock
Load Cell Module (HX711)
60.00 EGP -
Linear Power Module (LM317)
This module is an adjustable voltage regulator based on LM317.
Features :
- Input voltage range: 4.2 ~ 40V.
- Output voltage (adjustable): 1.2 ~ 37V.
- Maximum output current: 1A.
- Thermal shutdown protection.
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 43 X 21 X 23mm.
40.00 EGPIn stock
Linear Power Module (LM317)
40.00 EGP -
Real Time Clock Module (DS3231)
This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.
Features :
- Operating voltage: 5V.
- Supports the 24-hour or 12-hour format with an AM/PM indicator.
- Interface: I2C.
- On-board CR2032 3V lithium battery.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 33 X 30 X 10mm.
110.00 EGPIn stock
Real Time Clock Module (DS3231)
110.00 EGP -
8-LED Active Low Module (LN8)
LN8 is an 8-bit LED display module.
Features :
- Suitable for breadboard testing.
- LEDs are active LOW enabled. i.e to turn a LED ON apply a low logic level.
- LN8 is a common anode module ( all positive terminals are connected together and brought out via pin header ).
- TTL compatible.
- Wide input voltage range 3V:12V.
- Compatible with our microcontroller development kits such as Eta32, and Betamini.
0.00 EGP – 20.00 EGPIn stock
-
8-LED Active High Module (LP8)
LP8 is an 8-bit LED display module.
Features :
- Suitable for breadboard testing.
- LEDs are active high enabled. i.e to turn a LED on apply a high logic level.
- LP8 is a common cathode module ( all negative terminals are connected together and brought out via pin header ).
- TTL compatible.
- Wide input voltage range 3V:12V.
- Compatible with our microcontroller development kits such as Eta32, and Betamini.
20.00 EGPIn stock
-
Real Time Clock Module (DS1307)
This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.
Features :
- Operating voltage 5V.
- Supports the 24-hour or 12-hour format with an AM/PM indicator.
- Interface: I2C.
- On-board CR2032 3V lithium battery.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 37 X 26 X 10mm.
75.00 EGPIn stock
Real Time Clock Module (DS1307)
75.00 EGP -
3A / 8-Channel +ve Output Transistor Interface Module TP8
Opto-isolated 8-channel / 3 Ampere positive output transistor module for PLC industrial control.
Features :
- 8-channel positive output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3A.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 129 X 90 X 22mm.
550.00 EGPIn stock
-
3A / 8-Channel -ve Output Transistor Interface Module TN8
Opto-isolated 8-channel / 3 Ampere negative output transistor module for PLC industrial control.
Features :
- 8-channel negative output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3A.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 129 X 90 X 22mm.
550.00 EGPIn stock
-
3A / 2-Channel +ve Output Transistor Interface Module TP2
Opto-isolated 2-channel / 3 Ampere positive output transistor module for PLC industrial control.
Features :
- 2-channel positive output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3A.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 90 X 53 X 22mm.
150.00 EGPIn stock
-
3A / 4-Channel +ve Output Transistor Interface Module TP4
Opto-isolated 4-channel / 3 Ampere positive output transistor module for PLC industrial control.
Features :
- 4-channel positive output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3 ampere.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 90 X 78 X 22mm.
300.00 EGPIn stock
-
3A / 2-Channel -ve Output Transistor Interface Module TN2
Opto-isolated 2-channel / 3 Ampere negative output transistor module for PLC industrial control.
Features :
- 2-channel negative output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3A.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 90 X 53 X 22mm.
150.00 EGPIn stock
-
3A / 4-Channel -ve Output Transistor Interface Module TN4
Opto-isolated 4-channel / 3 Ampere negative output transistor module for PLC industrial control.
Features :
- 4-channel negative output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3 ampere.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 90 X 78 X 22mm.
300.00 EGPIn stock
-
ESP-01 Breakout Board
ESP-01 breakout board is suitable for breadboard applications.
15.00 EGPIn stock
ESP-01 Breakout Board
15.00 EGP -
Bluetooth Adaptor
Bluetooth adapter module is a hardware tool suitable for configuring Bluetooth modules via PC using a HyperTerminal or any other configuration software.
60.00 EGPIn stock
Bluetooth Adaptor
60.00 EGP -
UART Serial RS232/TTL Converter (DB9 to Pin Header)
Serial UART Module converts serial RS232 to TTL signal using MAX232 IC. It can be used to interface PC to microcontrollers and Arduino boards. This module can be used with many microcontrollers (AVR, PIC, Intel, etc), and allows bidirectional communication (converts signals from TTL level to RS232 and from RS232 level to TTL).
Features :
- Converts signals from RS232 to TTL and vice versa.
- Compatible with many microcontrollers.
- Works with any PC or laptop.
- Operating voltage: 5V.
- Red LED indicator for each signal.
- Green LED for power indication.
- Signals are provided through pin headers.
- Pins are clearly labeled according to their function.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 3mm) mounting holes for easy installation.
- Dimensions: 55 X 35 X 12mm.
70.00 EGPIn stock
-
1-Channel Active High Relay Module (12V) RM112
1-Channel relay module (12V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
40.00 EGPIn stock
-
8-Channel Solid State Relay Module (5V) SSR805
8-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.
Features :
- Input signal: 5V (active high).
- Maximum output current: 2A.
- Maximum output voltage: 240VAC.
- 2 Ampere overcurrent protection fuse.
- LED indicator.
550.00 EGPIn stock
-
4-Channel Solid State Relay Module (5V) SSR405
4-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.
Features :
- Input signal: 5V (active high).
- Maximum output current: 2A.
- Maximum output voltage: 240VAC.
- 2 Ampere overcurrent protection fuse.
- LED indicator.
280.00 EGPIn stock
-
2-Channel Solid State Relay Module (5V) SSR205
2-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.
Features :
- Input signal: 5V (active high).
- Maximum output current: 2A.
- Maximum output voltage: 240VAC.
- 2 Ampere overcurrent protection fuse.
- LED indicator.
150.00 EGPIn stock
-
1-Channel Solid State Relay Module (5V) SSR105
1-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.
Features :
- Input signal: 5V (active high).
- Maximum output current: 2A.
- Maximum output voltage: 240VAC.
- 2 Ampere overcurrent protection fuse.
- LED indicator.
75.00 EGPIn stock
-
AC/DC Filter 3A
AC/DC power filter is a bidirectional passive Low pass filter useful in filtering the output voltages of power supplies or transformers (not line input) such as filtering output 24VAC of a transformer. For AC Line filtration use our AC Line Filter.
Features :
- Maximum operating voltage: AC250V / DC400V.
- Maximum Current: 3A.
- Cut-off frequency: 5KHz.
- Operating temperature: -40 to 85°C.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 47 X 22 X 17mm.
45.00 EGPIn stock
AC/DC Filter 3A
45.00 EGP -
1-Channel Active High Relay Module (5V) RM105
1-Channel relay module (5V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
40.00 EGPIn stock
-
3+3+2 Digits 0.56” 7-Segment Display Module 56D332
56D332 is a serial SPI 3+3+2-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
110.00 EGP – 115.00 EGPIn stock
3+3+2 Digits 0.56” 7-Segment Display Module 56D332
110.00 EGP – 115.00 EGP -
4+4 Digits 0.56” 7-Segment Display Module 56D440
56D440 is a serial SPI 4+4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
110.00 EGP – 115.00 EGPIn stock
4+4 Digits 0.56” 7-Segment Display Module 56D440
110.00 EGP – 115.00 EGP -
3+3 Digits 0.56” 7-Segment Display Module 56D330
56D330 is a serial SPI 3+3-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. Max7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
90.00 EGPIn stock
-
8 Digits 0.56” 7-Segment Display Module 56D800
56D800 is a serial SPI 8-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
110.00 EGP – 115.00 EGPIn stock
8 Digits 0.56” 7-Segment Display Module 56D800
110.00 EGP – 115.00 EGP -
4 Digits 0.56” 7-Segment Display Module 56D400
56D400 is a serial SPI 4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
100.00 EGP – 105.00 EGPIn stock
4 Digits 0.56” 7-Segment Display Module 56D400
100.00 EGP – 105.00 EGP -
3+3+2 Digits 0.36” 7-Segment Display Module 36D332
36D332 is a serial SPI 3+3+2-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
100.00 EGPIn stock
-
3+3 Digits 0.36” 7-Segment Display Module 36D330
36D330 is a serial SPI 3+3-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
90.00 EGPIn stock
-
8 Digits 0.36” 7-Segment Display Module 36D800
36D800 is a serial SPI 8-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
100.00 EGPIn stock
-
4 Digits 0.36” 7-Segment Display Module 36D400
36D400 is a serial SPI 4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
80.00 EGPIn stock
-
4+4 Digits 0.36” 7-Segment Display Module 36D440
36D440 is a serial SPI 4+4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
100.00 EGPIn stock
-
6Axis CNC Breakout Board (VIVA+)
VIVA+ is a completely buffered CNC parallel breakout board. Supports up to 6 axes, five inputs, spindle and coolant output relays, analog output 0-10V, watchdog protection with extra output relay, and is powered from 220VAC.
VIVA+ Features :
- Completely supports MACH3 and any other soft tool that uses an LPT port.
- AC 220V input power.
- 6 axes control signals (Pulse ”PUL” and Direction “DIR”) :
- Main / Auxiliary X-axis.
- Main / Auxiliary Y-axis.
- Z-axis.
- A-axis.
- B-axis.
- C-axis.
- Control signals are TTL compatible (10mA).
- Supports five external inputs. Three inputs for axes limits (NPN proximity sensors or micro switch inputs) and two inputs for emergency stop and probe inputs (dry contact).
- All inputs are optically isolated for safety.
- Two relay outputs for spindle and coolant control (5A maximum current).
- Optional extra output relay (controlled from pin9).
- 0-10V analog output (PWM-controlled) for controlling spindle speed.
- Watchdog feature with optional relay output to ensure that all outputs are disabled during PC starting up and software program loading.
- All outputs and inputs are brought out via pluggable screw clamp connectors for flexibility.
- LED indicator for :
- Output pulse signal “PUL” (RED LED).
- Output direction signal “DIR” (Green LED).
- Output relays “spindle”, “coolant” and “watchdog” (RED LED).
- Input signals ”XL”, ”YL”, ”ZL”, ”EMR”, and ”PRB” (Yellow LED).
- Input power (RED LED).
- Dimension: 180 X 110 X 30 mm.
900.00 EGPIn stock
6Axis CNC Breakout Board (VIVA+)
900.00 EGP -
CNC Breakout Board (VIVAmini)
Complete buffered CNC parallel breakout board. Supports up to 4 axes, five inputs, spindle and coolant output relays, PWM output, and a wide power supply range of 11V ~ 24V.
450.00 EGPIn stock
CNC Breakout Board (VIVAmini)
450.00 EGP -
1-Channel Relay Module (5V/12V/24V) RM1V
1-Channel relay module (5V/12V/24V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
50.00 EGPIn stock
1-Channel Relay Module (5V/12V/24V) RM1V
50.00 EGP -
ESP12 Breakout Board
ESP8266 (ESP12) Wi-Fi module breakout board.
15.00 EGPIn stock
ESP12 Breakout Board
15.00 EGP -
ESP-01 Adapter Module
ESP-01 adapter module for serial communication to microcontroller and Arduino board.
ESP-01 not included.55.00 EGPIn stock
ESP-01 Adapter Module
55.00 EGP -
RC Snubber Module
RC absorption/snubber circuit module. Suitable for relay contact protection.
30.00 EGPIn stock
RC Snubber Module
30.00 EGP -
Digital Humidity and Temperature Sensor Module (DHT11)
The DHT11 is a basic low-cost digital humidity and temperature sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and provides a digital signal on the data pin. It’s fairly simple to use but requires careful timing to grab data, you can only get new data from it once every 2 seconds.
This module is an implementation of the popular low-cost DHT11 sensor. It comes with proper headers to make it even easier to connect to any exposed pins of your development board.
Features :
- Operating voltage: 3V ~ 5V.
- Humidity measurement ranges from 20%~80% with ±5% accuracy.
- Temperature measurement range 0°C ~ 50°C with ±2°C accuracy.
- Interface: One-wire communication protocol.
50.00 EGPIn stock
-
USB Type A Female to Pin Header
USB type A female socket on PCB to header suitable for breadboard test applications.
12.00 EGPIn stock
USB Type A Female to Pin Header
12.00 EGP
