8-Channel relay module (12V ) up to 10A rated current directly interfaced to a microcontroller or TTL logic.

IC Package Converter (SOIC16-150mil/DIP16).

Opto-isolated 8-channel / 5 Ampere negative output transistor module for PLC industrial control.

  Features :

• 8-channel negative output FET type transistor.
• Operating voltage range: 12-36V (for 48V output pls contact us).
• Maximum operating current: 5 ampere.
• All channels are opto-isolated for safety.
• Green LED indicator for power input.
• Yellow LED indicator for each Input.
• Red LED indicator for each output.
• Provides 3A fuse for overcurrent protection.
• DIN rail mountable plastic box enclosure.
• Dimensions: 145 X 90 X 40mm.

8-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

  Features :

• LED indicator for each output relay.
• Both normally open and normally close are available.
• Contact current up to 10A (Resistive load).
• Isolated/non-isolated operation mode.
• Active high/low trigger operation.
• Input signals can be applied through screw terminals or pin headers for flexibility.
• Separated screw terminal power input for relay contact (isolated mode).
• Reverse polarity protection.
• Four (Ø 3.5mm) mounting holes for easy installation.
• Dimension: 146 X 66 X 20mm.

2-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

  Features : 

• LED indicator for each output relay.
• Both normally open and normally close are available.
• Contact current up to 10A (Resistive load).
• Isolated/non-isolated operation mode.
• Active high/low trigger operation.
• Input signals can be applied through screw terminals or pin headers for flexibility.
• Separated screw terminal power input for relay contact (isolated mode).
• Reverse polarity protection.
• Four (Ø 3.5mm) mounting holes for easy installation.
• Dimension: 66 X 47 X 20mm.

The photo-reflector consists of a GaAs infrared light-emitting diode and a silicon planar phototransistor. When an object is placed right in front of the sensor, the reflective infrared light emitted from the emitter will be picked up by the phototransistor and then output logical HIGH or logical LOW according to the distance between the reflection surface and the sensor.

  Features :

• Using a wide voltage LM393 comparator.
• The working voltage of 3.3V-5V.
• Maximum output sink current 10mA.
• Operating range 0~5mm.
• Output is active low i.e an interruption produces a low output (LED is activated).
• Two (Ø 3.5mm) mounting holes for easy installation.
• It is compatible with Arduino board.
• Dimension: 38 X 17 X 17mm.

1-Channel relay module (5V) up to 10A rated current directly interfaced to microcontroller or TTL logic.

4-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

  Features :

• LED indicator for each output relay.
• Both normally open and normally close are available.
• Contact current up to 10A (Resistive load).
• Isolated/non-isolated operation mode.
• Active high/low trigger operation.
• Input signals can be applied through screw terminals or pin headers for flexibility.
• Separated screw terminal power input for relay contact (isolated mode).
• Reverse polarity protection.
• Four (Ø 3.5mm) mounting holes for easy installation.
• Dimension: 80 X 66 X 20mm.

This module allows for safe and easy communication between devices operating at different logic levels. Typically 3.3V and 5V.

   Features :

• 2-channel bi-directional logic converter suitable for bi-directional buses such as I²C, as well as uni-directional such as SPI and TTL serial communication.
• Voltage signal range: 1.8-5V.
• 2.54mm male header.
• Dimensions: 14 X 11 X 4mm ( with no pin header ).

Opto-isolated 8-channel / 3 Ampere negative output transistor module for PLC industrial control. 

   Features :

• 8-channel negative output FET type transistor.
• Operating voltage range: 12-36V (for 48V output pls contact us).
• Maximum operating current: 3A.
• All channels are opto-isolated for safety.
• Green LED indicator for power input.
• Yellow LED indicator for each Input.
• Red LED indicator for each output.
• Provides 3A fuse for overcurrent protection.
• Four (Ø 3.5mm) mounting holes for easy installation.
• DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
• Dimensions: 129 X 90 X 22mm.

8-Channel DC power distributor module.

   Features :

• Operating voltage: 5~48 DCV.
• Maximum output current: 10A/Channel.
• Protection fuse for each channel.
• Green LED indicator for input voltage.
• Red LED indicator for each output voltage.
• 100nF filter capacitor for each output channel.
• Four (Ø 3.5mm) mounting holes for easy installation.
• DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
• Dimension: 143 X 72 X 20mm.

PD26 is a dual-channel industrial proportional solenoid valve driver suitable for flow and pressure control.

   Features :

• Operating mode: Switching.
• Operating voltage range: 18~36V.
• Maximum output power: 150W.
• Pot-adjustable output voltage range: 12~24V.
• Maximum output current: 6A.
• Two selectable input signal ranges: (0~5V) and (0~10V).
• Two selectable output reference voltages 5V and 10V (MAX 20mA).
• Reverse polarity protection.
• Over-current and short-circuit protection.
• Green LED for power indication.
• Yellow LED for each output indication.
• Red LED for each output fault status.
• Four (Ø 3.5mm) mounting holes for easy installation.
• DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
• Dimension: 122 X 112 X 30mm.

RJ45 side by side coupler.

2-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.

  Features :

• LED indicator for each output relay.
• Both normally open and normally close are available.
• Contact current up to 10A (Resistive load).
• Isolated/non-isolated operation mode.
• Active high/low trigger operation.
• Input signals can be applied through screw terminals or pin headers for flexibility.
• Separated screw terminal power input for relay contact (isolated mode).
• Reverse polarity protection.
• Four mounting holes for easy installation.
• Dimension: 66X30X20 mm.

DB25 female socket on PCB to header suitable for breadboard test applications.

This USB hub has four USB 2.0 ports each with a max total transmission speed of up to 480 MBps. All four ports are powered through the USB-B cable.
This hub is great for giving your laptop or computer a few more plug-in options, no adapter is required.

  Features: 

• Number of ports: 4.
• no adapter is required.
• PC interface: USB type B.
• USB device interface: USB type A.
• Output: 100mA MAX.
• Two (Ø 3.5mm) mounting holes for easy installation.

2-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.

  Features : 

• Input signal: 5V (active high).
• Maximum output current: 2A.
• Maximum output voltage: 240VAC.
• 2 Ampere overcurrent protection fuse.
• LED indicator.

DB9 female socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector DB9 and is also suitable for panel mounting and test applications.

  Features :

• DB9 pins are routed to pin headers and screw clamp terminals.
• Both terminals are labeled according to the DB9 pin number to which they are routed.
• Pin header pitch distance 2.54mm.
• Screw terminal pitch distance 3.5mm.
• Four (Ø 3.5mm) mounting holes for easy installation.
• Dimensions: 50 X 30 X 25mm.

IC Package Converter (SOIC16-300mil/DIP16).

4-Channel DC power distributor module.

   Features :

• Operating voltage: 5~48 DCV.
• Maximum output current: 10A/Channel.
• Protection fuse for each channel.
• Green LED indicator for input voltage.
• Red LED indicator for each output voltage.
• 100nF filter capacitor for each output channel.
• Four (Ø 3.5mm) mounting holes for easy installation.
• DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
• Dimension: 91 x 72 x 20mm.