-
1-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM112I
1-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 30 X 20mm.
75.00 EGPIn stock
-
1-Channel High/Low Trigger Relay Module (24V) Opto-isolated RM124I
1-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 30 X 20mm.
75.00 EGPIn stock
-
1-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM105I
1-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 30 X 20mm.
75.00 EGPIn stock
-
Real Time Clock Module (DS1307 & 4K Memory 24C32)
This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.
Features :
- Operating voltage 5V.
- Supports the 24-hour or 12-hour format with an AM/PM indicator.
- Interface: I2C.
- On-board 4K I2C serial EEPROM.
- On-board CR2032 3V lithium battery.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 36 X 24 X 10mm.
75.00 EGPIn stock
-
4 Digits 0.36” 7-Segment Display Module 36D400
36D400 is a serial SPI 4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
80.00 EGPIn stock
-
DB25 Vertical Male to Screw Terminal + Pin Header
DB25 male socket vertical type on PCB to block terminals and pin header facilitates solderless connection to standard serial connector. DB25 is also suitable for panel mounting and test applications.
Features :
- DB25 pins are routed to pin headers and screw clamp terminals.
- Both terminals are labeled according to the DB25 pin number to which they are routed.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 4mm) mounting holes for easy installation.
- Dimensions: 65 X 45 X 25mm.
80.00 EGPIn stock
-
5A Current Sensor Module (ACS712)
5A Current Sensor Module (ACS712).
Features:
- Operating voltage: 5V.
- Green LED for power indication.
- Input interface 5.08mm screw clamp terminal.
- Power and output signal interface: 2.54mm male pin header.
- Maximum current: 5A.
- Dimension: 30 X 13 X 12mm.
80.00 EGPIn stock
5A Current Sensor Module (ACS712)
80.00 EGP -
4 Port USB 2.0 Hub
This USB hub has four USB 2.0 ports each with a max total transmission speed of up to 480 MBps. All four ports are powered through the USB-B cable.
This hub is great for giving your laptop or computer a few more plug-in options, no adapter is required.Features:
- Number of ports: 4.
- no adapter is required.
- PC interface: USB type B.
- USB device interface: USB type A.
- Output: 100mA MAX.
- Two (Ø 3.5mm) mounting holes for easy installation.
80.00 EGPIn stock
4 Port USB 2.0 Hub
80.00 EGP -
Breadboard Power Supply Module MB102
Power supply module for breadboard applications (3.3V, 5V, and VDC).
Features :
- Input voltage range 6.5V >> 15V.
- Output voltages 3.3V, 5V, and Vin.
- Output 5V (USB type A female socket).
- Output voltages are available via screw terminal block and pin header for flexibility.
- ON/OFF switch.
- Reverse polarity protection.
- Over current protection (1A).
90.00 EGPIn stock
Breadboard Power Supply Module MB102
90.00 EGP -
2-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM205I
2-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four mounting holes for easy installation.
- Dimension: 66X30X20 mm.
90.00 EGPIn stock
-
2-Channel Relay Module (5V/12V/24V) RM2V
2-Channel relay module (5V/12V/24V) up to 10A rated current directly interfaced to microcontroller or TTL logic.
90.00 EGPIn stock
2-Channel Relay Module (5V/12V/24V) RM2V
90.00 EGP -
2-Channel High/Low Trigger Relay Module(12V) opto-isolated RM212I
2-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 47 X 20mm.
90.00 EGPIn stock
-
3+3 Digits 0.36” 7-Segment Display Module 36D330
36D330 is a serial SPI 3+3-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
90.00 EGPIn stock
-
3+3 Digits 0.56” 7-Segment Display Module 56D330
56D330 is a serial SPI 3+3-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. Max7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
90.00 EGPIn stock
-
2-Channel High/Low Trigger Relay Module(24V) Opto-isolated RM224I
2-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 66 X 47 X 20mm.
90.00 EGPIn stock
-
20A Current Sensor Module (ACS712)
20A Current Sensor Module (ACS712).
Features:
- Operating voltage: 5V.
- Green LED for power indication.
- Input interface 5.08mm screw clamp terminal.
- Power and output signal interface: 2.54mm male pin header.
- Maximum current: 20A.
- Dimension: 30 X 13 X 12mm.
90.00 EGPIn stock
20A Current Sensor Module (ACS712)
90.00 EGP -
4-Channel Isolation Module
4-channel opto-isolated module suitable for voltage level converting.
Features :
- Two selectable Input control signal ranges (3-12V and 9-24V).
- Output signal range: 3-24V.
- LED indicator for each input.
- Dedicated 2-pin screw clamp terminal for each input and output.
- Output can drive high or low-triggered load.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 80 X 50 X 17mm.
95.00 EGPIn stock
4-Channel Isolation Module
95.00 EGP -
4+4 Digits 0.36” 7-Segment Display Module 36D440
36D440 is a serial SPI 4+4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
100.00 EGPIn stock
-
8 Digits 0.36” 7-Segment Display Module 36D800
36D800 is a serial SPI 8-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
100.00 EGPIn stock
-
3+3+2 Digits 0.36” 7-Segment Display Module 36D332
36D332 is a serial SPI 3+3+2-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
100.00 EGPIn stock
-
4 Digits 0.56” 7-Segment Display Module 56D400
56D400 is a serial SPI 4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
100.00 EGP – 105.00 EGPIn stock
4 Digits 0.56” 7-Segment Display Module 56D400
100.00 EGP – 105.00 EGP -
8-Channel Opto-isolated AC Input Detector Module (ACD8)
This module detects whether AC input exists.
Features :
- Input voltage range 110-250V.
- Output voltage range 3-24V.
- Input is opto-isolated for safety.
- Four (Ø 3.5mm) mounting holes for easy installation.
- LED indicator for AC input.
- Output and power pins are broken out into a pin header for easy interfacing.
- Dimensions: 96 X 51 X 15mm.
100.00 EGPIn stock
-
Dual Channel UART Serial RS232/TTL Converter (Terminal to Terminal)
Serial UART Module converts serial RS232 to TTL signal using MAX232 IC. It can be used to interface RS232 devices like PCs and some LCDs to microcontrollers and Arduino boards. This module can be used with many microcontrollers (AVR, PIC, Intel, etc), and allows bidirectional communication (converts signals from TTL level to RS232 and from RS232 level to TTL).
Features :
- Converts signals from RS232 to TTL and vice versa.
- Compatible with many microcontrollers.
- Operating voltage: 5V.
- Supports two channels ( Two pairs of Rx, Tx).
- Red LED indicator for each transmitting signal.
- Yellow LED indicator for each receiving signal.
- Green LED for power indication.
- All Signals are provided through both pin headers and screw clamp terminals for flexibility.
- Pins are clearly labeled according to their function.
- Pin header pitch distance 2.54mm.
- Screw terminal pitch distance 3.5mm.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 55 X 35 X 12mm.
100.00 EGPIn stock
-
4-Channel DC Power Distributor
4-Channel DC power distributor module.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/Channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 91 x 72 x 20mm.
100.00 EGPIn stock
4-Channel DC Power Distributor
100.00 EGP -
30A Current Sensor Module (ACS712)
30A Current Sensor Module (ACS712).
Features:
- Operating voltage: 5V.
- Green LED for power indication.
- Input interface 7.5mm screw clamp terminal.
- Power and output signal interface: 2.54mm male pin header.
- Maximum current: 30A.
- One (Ø 3.5mm) mounting hole for easy installation.
- Dimension: 34 X 15 X 14mm.
100.00 EGPIn stock
30A Current Sensor Module (ACS712)
100.00 EGP -
8 Digits 0.56” 7-Segment Display Module 56D800
56D800 is a serial SPI 8-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
110.00 EGP – 115.00 EGPIn stock
8 Digits 0.56” 7-Segment Display Module 56D800
110.00 EGP – 115.00 EGP -
4+4 Digits 0.56” 7-Segment Display Module 56D440
56D440 is a serial SPI 4+4-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
110.00 EGP – 115.00 EGPIn stock
4+4 Digits 0.56” 7-Segment Display Module 56D440
110.00 EGP – 115.00 EGP -
3+3+2 Digits 0.56” 7-Segment Display Module 56D332
56D332 is a serial SPI 3+3+2-digit 7-segment LED display module based on MAX7219 driver. The module is 5V powered and easy to interface to Arduino board or any microcontroller. MAX7219 driver provides individual LED segment control, display ON/OFF, and brightness control.
110.00 EGP – 115.00 EGPIn stock
3+3+2 Digits 0.56” 7-Segment Display Module 56D332
110.00 EGP – 115.00 EGP -
Real Time Clock Module (DS3231)
This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.
Features :
- Operating voltage: 5V.
- Supports the 24-hour or 12-hour format with an AM/PM indicator.
- Interface: I2C.
- On-board CR2032 3V lithium battery.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 33 X 30 X 10mm.
110.00 EGPIn stock
Real Time Clock Module (DS3231)
110.00 EGP -
USB to RS232 Serial Module (CH340) B-Type USB Socket to DB9/Header
This USB to RS232 converter is based on CH340 USB to serial IC. It provides a virtual serial port over USB 2.0 port. Serial signals are provided in RS232 level to both header pins and standard DB9 male socket. Once you have installed the drivers the module will appear as a normal serial COM port on your computer making it compatible with most terminal programs and development environments.
Features :
- Provides virtual serial port over USB2.0 port.
- Supports Win7, Win8, Win10 32/64Bit.
- B-type socket Full speed 2.0 USB interface.
- Supports up to 2Mbps baud rates.
- RS232 signals are provided to both pin header and Standard DB9 socket for flexibility.
- Self-powered from USB 5V.
- Supports Rx, Tx, DTR, and DSR signals.
- Red LEDs indicator for Rx and Tx signals.
- Green LED for power status.
- 5V from USB is available to header pin for supplying external devices (100mA MAX).
- Two 3mm mounting holes for easy installation.
- Dimensions: 64X33X19 mm.
120.00 EGPIn stock
-
10A AC Line Filter
AC 250V 10A EMI Filter.
Features :
- Maximum operating voltage: AC250V.
- Maximum Current: 10 Ampere.
- Cut-off frequency: 5KHz.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 60 X 30 X 30mm.
130.00 EGPIn stock
10A AC Line Filter
130.00 EGP -
8-Channel Isolation Module
8-channel opto-isolated module suitable for voltage level converting.
Features :
- Two selectable Input control signal ranges (3-12V and 9-24V).
- Output signal range: 3-24V.
- LED indicator for each input.
- Dedicated 2-pin screw clamp terminal for each input and output.
- Output can drive high or low-triggered load.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 129 X 50 X 17mm.
130.00 EGPIn stock
8-Channel Isolation Module
130.00 EGP -
4-Channel Active High Relay Module (12V) RM412
4-Channel relay module (12V ) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
135.00 EGPIn stock
-
4-Channel Active High Relay Module (5V) RM405
4-Channel relay module (5V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
135.00 EGPIn stock
-
4-Channel Active High Relay Module (24V) RM424
4-Channel relay module (24V) up to 10A rated current directly interfaced to a microcontroller or TTL logic.
135.00 EGPIn stock
-
6-Channel DC Power Distributor
6-Channel DC power distributor module.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/Channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 119 X 73 X 19mm.
140.00 EGPIn stock
6-Channel DC Power Distributor
140.00 EGP -
Real Time Clock Module (DS3231 & 4K Memory 24C32)
This RTC module is based on the clock chip DS1307 that provides seconds, minutes, hours, day, date, month, and year information.
Features :
- Operating voltage 5V.
- Supports the 24-hour or 12-hour format with an AM/PM indicator.
- Interface: I2C.
- On-board 4K I2C serial EEPROM.
- On-board CR2032 3V lithium battery.
- Two (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 34 X 24 X 10mm.
140.00 EGPIn stock
-
4-Channel Relay Module (5V/12V/24V) RM4V
4-Channel relay module (5V/12V/24V) up to 10A rated current directly interfaced to microcontroller or TTL logic .
150.00 EGPIn stock
4-Channel Relay Module (5V/12V/24V) RM4V
150.00 EGP -
4-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM405I
4-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four mounting holes for easy installation.
- Dimension: 80X66X20 mm.
150.00 EGPIn stock
-
4-Channel High/Low Trigger Relay Module (12V) Opto-isolated RM412I
4-Channel 12V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 80 X 66 X 20mm.
150.00 EGPIn stock
-
2-Channel Solid State Relay Module (5V) SSR205
2-Channel solid state relay module (5V) 240VAC/2A directly interfaced to microcontroller or TTL logic.
Features :
- Input signal: 5V (active high).
- Maximum output current: 2A.
- Maximum output voltage: 240VAC.
- 2 Ampere overcurrent protection fuse.
- LED indicator.
150.00 EGPIn stock
-
3A / 2-Channel -ve Output Transistor Interface Module TN2
Opto-isolated 2-channel / 3 Ampere negative output transistor module for PLC industrial control.
Features :
- 2-channel negative output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3A.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 90 X 53 X 22mm.
150.00 EGPIn stock
-
3A / 2-Channel +ve Output Transistor Interface Module TP2
Opto-isolated 2-channel / 3 Ampere positive output transistor module for PLC industrial control.
Features :
- 2-channel positive output FET type transistor.
- Operating voltage range: 12-36V (for 48V output pls contact us).
- Maximum operating current: 3A.
- All channels are opto-isolated for safety.
- Green LED indicator for power input.
- Yellow LED indicator for each Input.
- Red LED indicator for each output.
- Provides 3A fuse for overcurrent protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimensions: 90 X 53 X 22mm.
150.00 EGPIn stock
-
4-Channel High/Low Trigger Relay Module (24V) Opto-isolated RM424I
4-Channel 24V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 80 X 68 X 20mm.
150.00 EGPIn stock
-
USB to RS485 Serial Converter Module
This USB to RS485 converter is based on CH340 USB to serial IC. It provides a virtual serial port over a USB 2.0 port. Serial signals are provided in RS485 level to screw clamp terminal. Once you have installed the drivers, the module will appear as a normal serial COM port on your computer, making it compatible with most terminal programs and development environments.
Features:
- Provides virtual serial port over USB2.0 port.
- MAX487 transceiver.
- Supports Win 7, 8, 10, and 11 32/64-bit.
- B-type socket full-speed 2.0 USB interface.
- USB-powered (5V).
- Half-duplex serial mode.
- RS485 data rate up to 250 Kbps.
- Serial baud rate up to 2 Mbps.
- Up to 128 nodes on bus.
- TVS protection ±30 KV ESD.
- PTC (JZ) for overcurrent fault protection.
- 120 Ohm terminal resistor included.
- Red LED indicator for Rx and Tx signals.
- Green LED for power status.
- One (Ø 3.5mm) mounting hole for easy installation.
- Dimensions: 49 X 21 X 15 mm.
150.00 EGPIn stock
USB to RS485 Serial Converter Module
150.00 EGP -
8-Channel DC Power Distributor
8-Channel DC power distributor module.
Features :
- Operating voltage: 5~48 DCV.
- Maximum output current: 10A/Channel.
- Protection fuse for each channel.
- Green LED indicator for input voltage.
- Red LED indicator for each output voltage.
- 100nF filter capacitor for each output channel.
- Four (Ø 3.5mm) mounting holes for easy installation.
- DIN Rail mounting using PCB carrier or PCB bracket ( Optional ).
- Dimension: 143 X 72 X 20mm.
175.00 EGPIn stock
8-Channel DC Power Distributor
175.00 EGP -
Project Work Area
FR4 PCB General project work area with DC power input and regulation.
Features :
- Double layer FR4 PCB.
- Project Kit can be powered from any general DC adaptor 8-20V thanks to an on-board 5V regulator.
- On-board reverse polarity protection.
- 15 External input via screw clamp terminals 3.5mm pitch.
- Large size work area 148 horizontal lines X 5 points, 37 X 3 vertical 5V lines, 37 X 3 vertical GND lines, 15 lines X 2 points (in addition to power rails GND, 5V, VIN).
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimensions: 118 X 108 X 20mm.
190.00 EGPIn stock
Project Work Area
190.00 EGP -
8-Channel High/Low Trigger Relay Module (5V) Opto-isolated RM805I
8-Channel 5V relay module up to 10A rated current active high/low trigger directly interfaced to microcontroller or TTL logic with opto-isolation.
Features :
- LED indicator for each output relay.
- Both normally open and normally close are available.
- Contact current up to 10A (Resistive load).
- Isolated/non-isolated operation mode.
- Active high/low trigger operation.
- Input signals can be applied through screw terminals or pin headers for flexibility.
- Separated screw terminal power input for relay contact (isolated mode).
- Reverse polarity protection.
- Four (Ø 3.5mm) mounting holes for easy installation.
- Dimension: 146 X 66 X 20mm.
220.00 EGPIn stock