-
Arduino Mega2560 Pro Mini
The Mega2560 Pro is compatible with the Arduino Mega2560 with a reduced physical size for embedded applications. Following the Mega2560 architecture, the Pro provides a large amount of I/O and memory, making it ideal for larger projects. It is built on the Atmel ATmega2560 with a CH340G USB-UART interface chip.
The board measures only 38 x 54mm (1.5-inch x 2.2-inch) with the ATmega2560 running at 16 MHz.
Interfacing with the USB port is done through the onboard CH340G and connects to the computer through the MicroUSB port.
Power to the board is supplied through the MicroUSB connector or to the power pin headers. The onboard 3.3V and 5V regulators give the versatility to provide 6-12V input (peak of 18V) DC. Due to the usage of linear regulators, try to use a power supply in the 6-12V range as excess power is given off as heat through the regulators.
Each package includes the Mega2560 Pro (with integrated CH340 USB driver), 2 x 16-pin and 2 x 21-pin male headers, and two 2×3 male headers.
Technical Specifications :
- ATmega2560 processor running at 16MHz.
- CH340 Serial to USB converter.
- 256KB Flash memory.
- 54 Digital I/O 15 PWM shared with the digital I/O.
- 16 Analog inputs (can also be used as digital I/O for a total of up to 70 digital I/O).
- 4 Hardware serial ports.
- Small form factor with all pins on 0.1″ centers.
- 5V Operation.
Setup and Configuration :
The Mega2560 Pro utilizes an onboard CH340G UART. A separate safe driver is needed to allow your host computer to communicate with the Mega2560. It is strongly encouraged to download the USB driver for your operating system from WCH official website.
1,450.00 EGPIn stock
Arduino Mega2560 Pro Mini
1,450.00 EGP -
Arduino Mega R3 Atmega2560 Development Board
The Arduino Mega 2560 Microcontroller Rev3 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. The Arduino Mega can be powered via USB Cable Type A to B or with an external power supply.
The Arduino Mega2560 has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. The ATmega2560 provides four hardware UARTs for TTL (5V) serial communication. The Arduino Mega2560 can be programmed with the free and open-source Arduino IDE through a USB connection without needing any extra hardware thanks to its pre-burnt bootloader.
Features :
- User-friendly USB programmable Arduino Microcontroller.
- Open Source design based on the larger ATmega2560.
- 54 digital I/O Pins and 16 analog I/O Pins.
- 256 KB of Flash Memory, 8 KB of SRAM, and 4 KB of EEPROM.
- Clock Speed: 16 MHz.
Specifications :
- Microcontroller: ATmega2560.
- Operating Voltage: 5V.
- Input Voltage (recommended): 7-12V.
- Input Voltage (limits): 6-20V.
- Digital I/O Pins: 54 (of which 14 provide PWM output).
- Analog Input Pins: 16.
- DC Current per I/O Pin: 40 mA.
- DC Current for 3.3V Pin: 50 mA.
- Flash Memory: 256 KB of which 8 KB is used by the bootloader.
- SRAM: 8 KB.
- EEPROM: 4 KB.
- Clock Speed: 16 MHz.
1,400.00 EGPIn stock
Arduino Mega R3 Atmega2560 Development Board
1,400.00 EGP -
Arduino Ethernet Shield Module W5100
The Arduino Ethernet Shield allows you to easily connect your Arduino to the internet. This shield enables your Arduino to send and receive data from anywhere in the world with an internet connection. You can use it to do fun stuff like control robots remotely from a website or ring a bell every time you get a new Twitter message. This shield opens up endless amounts of possibilities by allowing you to connect your project to the internet in no time flat.
750.00 EGPIn stock
Arduino Ethernet Shield Module W5100
750.00 EGP -
Arduino Uno R3 Atmega328P Development Board
Arduino Uno is a complete development board of microcontroller ATmega328. It is the most commonly used Arduino because of its compact size, number of I/O pins, price, availability, etc. It has 14 Digital input output pins of which 6 pins provide PWM outputs and 6 Analog output pins. It has everything that a general Arduino-based project needs.
450.00 EGPIn stock
Arduino Uno R3 Atmega328P Development Board
450.00 EGP -
STM32F401RCT6 – Black Pill Development Board
The Black Pill is a cheap development board based on STMicroelectronics STM32F401RCT6 microcontroller that has an ARM Cortex-M4 core that runs at 84MHz MAX.
400.00 EGPOut of stock
STM32F401RCT6 – Black Pill Development Board
400.00 EGP -
NRF24L01 2.4GHz Antenna Wireless Transceiver Module
NRF24L01P + PA + LNA wireless module operates in a Free license 2.4G ISM band. The Data transmission chip NRF24L01+, and matches with the department’s professional design, Add the chip of power PA and LNA, RF switch, bandpass filter composed of a professional full two-way RF power amplifier, making the effective communication distance greatly expanded. Easy to embed in any space-constrained products.
Features :
- Single-chip GFSK transceiver.
- Transmit power is greater than +20 dbm.
- Support six-channel data reception.
- operating voltage: 2.7 to 3.6V.
- Up to 125 channels.
- Air data rate is 250 kbps, 1 Mbps, or 2 Mbps.
- The communication mode it uses is Enhanced Shock Burst TM or Shock Burst TM.
- Power Down Mode or Standby Mode.
- SPI protocol for communication.
- Easily programmed and can connect with a microcontroller or Arduino board.
350.00 EGPIn stock
-
ESP32-WROOM-32D 16MB
Features :
- Operating voltage 3.0 V ~ 3.6 V.
- Operating current Average: 80 m.
- Minimum current delivered by power supply 500 mA.
- Recommended operating temperature range –40 °C ~ +85 °C.
- Integrated SPI flash 4 MB.
- ESP32 is a powerful, generic Wi-Fi+BT+BLE MCU module.
- Data rate of up to 150 Mbps.
- 20 dBm output power. 802.11 b/g/n (802.11n up to 150 Mbps).
- Frequency range 2.4 GHz ~ 2.5 GHz.
330.00 EGPIn stock
ESP32-WROOM-32D 16MB
330.00 EGP -
STM32F103C8T6 – Blue Pill Development Board ( Original )
The Blue Pill is a cheap development board based on STMicroelectronics’ STM32F103C8T6 microcontroller that has an ( ARM Cortex-M3 ) core that runs at 72MHz MAX.
300.00 EGPOut of stock
-
ST-Link V2 STM8/STM32 In-Circuit Debugger/Programmer
ST-Link V2 is a Debugger/Programmer for STM8 and STM32.
300.00 EGPIn stock
-
Arduino Nano V3 Atmega328P Development Board
Arduino Nano V3 CH340 Chip Atmega328P Board.
250.00 EGPIn stock
Arduino Nano V3 Atmega328P Development Board
250.00 EGP -
STM32F103C8T6 – Blue Pill Development Board USB-C (China)
The Blue Pill is a cheap development board based on STMicroelectronics STM32F103C8T6 microcontroller that has an ARM Cortex-M3 core that runs at 72MHz MAX.
200.00 EGPIn stock
-
Touch Switch
XD-621 Mirror Lamp Touch Switch 170-240VAC 500W High Safety Performance.
Features:
- This switch is an isolated touch sensor switch, applicable to all types of lamps on the medium (such as glass, acrylic, plastic, ceramic, etc).
- High safety performance, long lifespan, beautiful and generous.
- Can ensure customer safety, and effectively prevent the interference of the outside world.
- Working voltage: AC 170 to 240V 50 or 60 Hz.
- Load power: ≤ 500W.
- Touch switch size: 50 X 35 X 16 mm.
- Powerbox size: 75 X 43 X 21mm.
- Red and black wire connects AC 220V.
- Blue and black lines connect to lamp.
200.00 EGPIn stock
Touch Switch
200.00 EGP -
STM32F103C6T6 – Blue Pill Development Board (Original)
The Blue Pill is a cheap development board based on STMicroelectronics’ STM32F103C6T6 microcontroller that has an ARM Cortex-M3 core that runs at 72MHz MAX.
200.00 EGPIn stock
-
STM32F103C8T6 – Blue Pill Development Board (China)
The Blue Pill is a cheap development board based on STMicroelectronics STM32F103C8T6 microcontroller that has an ARM Cortex-M3 core that runs at 72MHz MAX.
200.00 EGPIn stock
-
ESP-12F WiFi Serial Transceiver Module
Features :
- The smallest 802.11b/g/n Wi-Fi SOC module.
- Low power 32-bit CPU, can also serve as the application processor.
- Up to 160MHz clock speed.
- Built-in 10-bit high-precision ADC.
- Supports UART/GPIO/IIC/PWM/ADC.
- SMD-22 package for easy welding.
- Integrated Wi-Fi MAC/BB/RF/PA/LNA.
- Support multiple sleep patterns. Deep sleep current as low as 20uA.
- Embedded LWIP protocol stack.
- Supports STA/AP/STA + AP operation mode.
- Supports remote firmware upgrade (FOTA).
180.00 EGPIn stock
ESP-12F WiFi Serial Transceiver Module
180.00 EGP -
ESP-01S
Wi-fi module based on the ESP8266 chip. Works in standard wi-fi 802.11 b/g/n at 2.4 GHz. Has 8 leads – a pitch of 2.54 mm, of which 3 are GPIO. Has a 1 MB Flash memory, built-in LED, and a PCB antenna.
Features :
- 802.11 b/g/n.
- Integrated low-power 32-bit MCU.
- Integrated TCP/IP protocol stack.
- Integrated TR switch, balun, LNA, power amplifier, and matching network.
- Integrated PLL, regulators, and power management units.
- Supports antenna diversity.
- Wi-Fi 2.4 GHz, supports WPA/WPA2.
- Support STA/AP/STA+AP operation modes.
- Support Smart Link Function for both Android and iOS devices.
- Deep sleep power <10uA, Power down leakage current < 5uA.
- Wake up and transmit packets in < 2ms.
- Standby power consumption of < 1.0mW (DTIM3).
- +20dBm output power in 802.11b mode.
- Operating temperature range -40C ~ 125C.
150.00 EGPIn stock
ESP-01S
150.00 EGP -
ESP-01
Wi-fi module based on the ESP8266 chip. Works in standard wi-fi 802.11 b/g/n at 2.4 GHz. Has 8 leads – a pitch of 2.54 mm, of which 3 are GPIO. Has a 1 MB Flash memory, built-in LED, and a PCB antenna.
Features :
- 802.11 b/g/n.
- Integrated low-power 32-bit MCU.
- Integrated TCP/IP protocol stack.
- Integrated TR switch, balun, LNA, power amplifier, and matching network.
- Integrated PLL, regulators, and power management units.
- Supports antenna diversity.
- Wi-Fi 2.4 GHz, supports WPA/WPA2.
- Support STA/AP/STA+AP operation modes.
- Support Smart Link Function for both Android and iOS devices.
- Deep sleep power <10uA, Power down leakage current < 5uA.
- Wake up and transmit packets in < 2ms.
- Standby power consumption of < 1.0mW (DTIM3).
- +20dBm output power in 802.11b mode.
- Operating temperature range -40C ~ 125C.
85.00 EGPOut of stock
ESP-01
85.00 EGP -
2.4GHz Wireless Transceiver nRF24L01 (85 Meter)
NRF24L01 is a wireless transceiver module (works on SPI Protocol), which is used for sending and receiving data at an operating radio frequency of 2.4 to 2.5 GHz ISM band.
Features :
- Single-chip GFSK transceiver.
- Up to 125 channels.
- power supply range is 1.9 to 3.6 V.
- Nominal current is 13 mA.
- SPI protocol for communication.
- Air data rate is 250 kbps, 1 Mbps, or 2 Mbps.
- Support six-channel data reception.
- Its sensitivity is 85 dBm at 1 Mbps.
- The communication mode it uses is Enhanced Shock Burst TM or Shock Burst TM.
- Power Down Mode or Standby Mode.
- It has a PA gain of 20 dB and an LNA gain of 10 dB.
- Easily programmed and can connect with a microcontroller or Arduino board.
- Maximum output power is +20 dBm.
85.00 EGPIn stock
-
Micro SD Card Module
Micro SD Card Module.
Features :
- Operating voltage: 3 – 5V.
- Interface: SPI.
- Dimensions: 42 X 24 X 3mm.
50.00 EGPIn stock
Micro SD Card Module
50.00 EGP
